Software Evaluation of Reducing the Number of Switching States and Removing the Weight Factor in the Predictive Current Control of Six-Phase Induction Motor
Subject Areas : electrical and computer engineeringPeyman Mirzaeipour 1 * , esmaeel rokrok 2 , Mohsen Saniei 3 , Syed Qudrat Allah seifosadat 4
1 - Shahid Chamran University of Ahvaz
2 - Lorestan University
3 - Shahid Chamran University of ahvaz
4 - Shahid Chamran University of Ahvaz
Keywords: Predictive current control, removal of weighting factor, six-phase induction motor,
Abstract :
The simple and accurate design of the flux weighting coefficient for the predictive current control (PCC) algorithm is an important issue that can be seen in all predictive controllers. It should be said that predictive current control is a promising method to obtain fast torque response with a simple and flexible structure, but its development to multi-phase drives can lead to dissatisfaction. In this article, due to the challenge of computing load of PCC algorithm, the weighting coefficient removal method is used and finally modified predictive current control (VV-PCC) without weighting coefficient is used for six-phase induction motor drive. Different operating conditions such as startup, sudden loading and different speeds have been investigated. As a result, choosing a switching state in PCC leads to high x-y currents, this problem requires a small number of repetitions with the proposed VV-PCC method based on removing the weighting factor, because the number of switching states has increased from 49 to 13, and finally It will reduce copper losses and improve power quality. The results and validation of the mentioned cases are presented using MATLAB software.
[1] M. Mamdouh and M. A. Abido, "Predictive current control of asymmetrical sixphase induction motor without weighting factors," Alexandria Engineering J., vol. 61, no. 1, pp. 3793-3804, Sep. 2022.
[2] B. M. Shihab, M. Tousizadeh, and H. S. Che, "Continuous and discontinuous PWM methods for symmetrical six-phase induction motor with single isolated neutral," Arab. J. Sci. Eng., vol. 45, no. 3, pp. 1885-1895, Apr. 2020.
[3] F. Wang, Z. Zhang, X. Mei, J. Rodriguez, and R. Kennel, "Advanced control strategies of induction machine: field oriented control, direct torque control and model predictive control," Energies, vol. 11, no. 2, pp. 120-128, Jul. 2018.
[4] F. Wang, X. Mei, J. Rodriguez, and R. Kennel, "Model predictive control for electrical drive systems-an overview," CES Trans. Electr. Mach. Syst., vol. 1, no. 3, pp. 219-230, Mar. 2017.
[5] S. A. Davari, D. A. Khaburi, and R. Kennel, "An improved FCS-MPC algorithm for an induction motor with an imposed optimized weighting factor," IEEE Trans. Power Electron., vol. 27, no. 3, pp. 1540-1551, Apr. 2012.
[6] P. Gonçalves, S. Cruz, and A. Mendes, "Finite control set model predictive control of six-phase asymmetrical machines an overview," Energies, vol. 12, no. 4, pp. 4693-4703, Aug. 2019.
[7] O. Gonzalez, et al., "Model predictive current control of six-phase induction motor drives using virtual vectors and space vector modulation," IEEE Trans. on Power Electronics, vol. 37, no. 7, pp. 7617-7628, Mar. 2022.
[8] H. S. Che, A. S. Abdel-Khalik, S. Member, and E. Levi, "Parameter estimation of asymmetrical six-phase induction machines using modified standard tests," IEEE Trans. Ind. Electron., vol. 64, no. 8, pp. 6075-6085, Nov. 2017.
[9] G. Rezazadeh, F. Tahami, G. Capolino, Z. Nasiri-Gheidari, H. Henao, and M. Sahebazamani, "Improved design of a six-phase squirrel cage induction motor with pseudo-concentrated windings," IEEE J. of Emerging and Selected Topics in Industrial Electronics, vol. 21, no. 3, pp. 1-11, May 2021.
[10] X. Sun, T. Li, X. Tian, and J. Zhu, "Fault-tolerant operation of a six-phase permanent magnet synchronous hub motor based on model predictive current control with virtual voltage vectors," IEEE Trans. on Energy Conversion, vol. 37, no. 1, pp. 337-346, Mar. 2022.
[11] M. Bermudez, C. Martin, I. Gonzalez-Prieto, M. J. Duran, M. R. Arahal, and F. Barrero, "Predictive current control in electrical drives: an illustrated review with case examples using a five-phase induction motor drive with distributed windings," IET Electr. Power Appl., vol. 14, no. 8, pp. 1327-1338, Jun. 2020.
[12] A. Al-Hitmi, K. Rahman, and N. Al-Emadi, "Control and modulation of three to asymmetrical six-phase matrix converters based on space vectors," J. of Power Electronics, vol. 19, no. 2, pp. 475-486, Mar. 2019.
[13] A. Habib, A. Shawier, M. Mamdouh, A. S. Abdel-Khalik, M. S. Hamad, and S. Ahmed, "Predictive current control based pseudo six-phase induction motor drive," Alexandria Engineering J., vol. 61, no. 5, pp. 3937-3948, Oct. 2022.
[14] J. Paredes, B. Prieto, M. Satrustegui, I. Elosegui, and P. Gonzalez, "Improving the performance of a 1-MW induction machine by optimally shifting from a three-phase to a six-phase machine design by rearranging the coil connections," IEEE Trans. Ind. Electron., vol. 68, no. 3, pp. 1035-1045, Feb. 2021.
[15] A. Gonzalez-Prieto, I. Gonzalez-Prieto, A. G. Yepes, M. J. Duran, and J. Doval-Gandoy, "On the advantages of symmetrical over asymmetrical multiphase ac drives with even phase number using direct controllers," IEEE Trans. on Industrial Electronics, vol. 69, no. 8, pp. 7639-7650, Aug. 2022.
[16] A. Shawier, A. Habib, M. Mamdouh, A. S. Abdel-Khalik, and K. H. Ahmed, "Assessment of predictive current control of six-phase induction motor with different winding configurations," IEEE Access, vol. 9, pp. 81125-81138, 2021.
[17] A. González-Prieto, I. González-Prieto, M. J. Duran, J. J. Aciego, and P. Salas-Biedma, "Current harmonic mitigation using a multi-vector solution for MPC in six-phase electric drives," IEEE Access, vol. 9, no. 2, pp. 117761-117771, Aug. 2021.
[18] M. Mamdouh and M. A. Abido, "Weighting factor elimination for predictive current control of asymmetric six-phase induction motor," in Proc. IEEE Int. Conf. on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe, EEEIC/I&CPS Europe’20, vol. 11, 6 pp., Madrid, Spain, 9-12 Jun. 2020.
[19] M. S. Abdel-Majeed, et al., "General current control of six-phase-based non-isolated integrated on-board charger with low order harmonic compensation," Sustainability, vol. 14, no. 3, Article ID: 1088, 2022.
[20] M. J. Durán, I. Gonzalez-Prieto, and A. Gonzalez-Prieto, "Large virtual voltage vectors for direct controllers in six-phase electric drives," International J. of Electrical Power & Energy Systems, vol. 125, Article ID: 106425, Feb. 2021.
[21] J. J. Aciego, I. G. Prieto, and M. J. Duran, "Model predictive control of six-phase induction motor drives using two virtual voltage vectors," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 7, no. 1, pp. 321-330, Oct. 2019.
[22] O. Gonzalez, et al., "Predictive-fixed switching current control strategy applied to six-phase induction machine," Energies, vol. 12, no. 12, Article ID: 2294, 2019.
[23] Y. Wang, A. Biswas, R. Rodriguez, Z. Keshavarz-Motamed, and A. Emadi, "Hybrid electric vehicle specific engines: state-of-the-art review," Energy Reports, vol. 8, no. 1, pp. 832-851, Mar. 2022.