Torque Ripple Reduction in Permanent-Magnetic BLDC Motor Using Optimum Design of Motor Structure
Subject Areas : electrical and computer engineeringM. R. Alizadeh Pahlavani 1 , Y. Shahbazi Ayat 2 * , A. Vahedi 3
1 -
2 -
3 - University of Science and Technology
Keywords: BLDC motor AFPM motor electromagnetic torque torque ripple,
Abstract :
In this paper instantaneous electromagnetic torque computation is done for axial flux permanent-magnet brushless DC (BLDC) motor using Lorentz force theorem. In this method, back electro motive force (EMF) and currents of phases should be defined. A novel method is presented for calculation of back EMF harmonics using analytical method (AM). The analytical results are compared with results obtained from the finite element method (FEM). A good agreement is between AM and FEM. Computational time in AM is much less than FEM. Finally, for torque ripple reduction, some motor geometric parameters are optimized using AM.
[1] P. Pillay and R. Krishnan, "Modeling, simulation, and analysis of permanent-magnet motor drives, part ii: the brushless DC motor drive," IEEE Trans. Ind. Appl., vol. 25, no. 2, pp. 274-279, Mar./Apr. 1989.
[2] A. Rubaai, A. Ofoli, and M. Castro, "dSPACE DSP-based rapid prototyping of fuzzy PID controls for high performance brushless servo drives," in the 41st IAS Annual Meeting of the IEEE Ind. Appl. Conf., IEEE Press, vol. 3, pp. 1360-1364, Oct. 2006.
[3] G. Mikerov Alexander, "Brushless DC torque motors quality level indexes for servo drive applications," in Proc. IEEE EUROCON 09, pp. 827-834, St.-Petersburg, Russia, 18-23 May 2009.
[4] D. C. Hanselman, "Minimum torque ripple, maximum efficiency excitation of brushless permanent magnet motors," IEEE Trans. Ind. Electron., vol. 41, no. 3, pp. 292-300, Jun. 1994.
[5] M. Aydin, S. Huang, and T. A. Lipo, "Axial flux permanent magnet disc machines: a review," in Proc. of Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM'04, pp. 61-71, Jun. 2004.
[6] M. Aydin, S. Huang, and T. A. Lipo, "Torque quality and comparison of internal and external rotor axial flux surface-magnet disc machines," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 822-830, Jun. 2006.
[7] C. C. Jensen, F. Profumo, and T. A. Lipo, "A low loss permanent magnet brushless DC motor utilizing tape wound amorphous iron," IEEE Trans. Ind. Appl., vol. 28, no. 3, pp. 646-651, May/Jun. 1992.
[8] T. M. Jahns and W. L. Soong, "Pulsating torque minimization techniques for permanent magnet AC motor drives-a review," IEEE Trans. Ind. Electron., vol. 43, no. 2, pp. 321-329, Apr. 1996.
[9] T. M. Jahns, "Torque production in permanent-magnet synchronous motor drives with rectangular current excitation," IEEE Trans. on Ind. Appl. vol. 20, no. 4, pp. 803-813, Jul./Aug. 1984.
[10] J. F. Gieras, Permanent Magnet Motor Technology: Design and Applications, 3rd Ed., Taylor and Francis Group, 2010.
[11] P. Upadhyay and K. R. Rajagopal, "Torque ripple minimization of interior permanent magnet brushless DC motor using rotor pole shaping," in Proc. IEEE Power Electronics, Drives and Energy Systems, PEDES'06, IEEE Press, 3 pp., 12-15 Dec. 2006.
[12] L. Parsa and H. Lei, "Interior permanent magnet motors with reduced torque pulsation," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 602-609, Feb. 2008.
[13] D. H. Wang, X. H. Wang, and T. T. Ding, "Optimization for the asymmetric angles of magnetic pole to reduce cogging torque in inner-buried PM brushless DC motors," Proceedings of the CSEE, vol. 28, no. 9, pp. 66-70, Mar. 2006.
[14] M. S. Islam, S. Mir, and T. Sebastian, "Design considerations of sinusoidally excited permanent magnet machines for low-torque-ripple applications," IEEE Trans. on Ind. Appl., vol. 41, no. 4, pp. 955-962, Jul./Aug. 2005.
[15] M. Shokri, N. Rostami, V. Behjat, J. Pyrhonen, and M. Rostami, "Comparison of performance characteristics of axial-flux permanent magnet synchronous machine with different magnet shapes," IEEE Trans. on Magnet., vol. 51, no. 12, Article No. 8115206, Dec. 2015.
[16] F. Song, B. Zhou, and X. Q. Wu, "Novel compensation method to suppress commutation torque ripple for brushless DC motor," Trans. of China Electrotechnical Society, vol. 23, no. 11, pp. 28-33, Nov. 2008.
[17] Y. Liu, Z. Q. Zhu, and D. Howe, "Commutation-torque-ripple minimization in direct-torque-controlled PM brushless DC drives," IEEE Trans. Industry Applications, vol. 43, no. 4, pp. 1012-1021, Jul./Aug. 2007.
[18] S. S. Bharatkar, R. Yanamshetti, and D. Chatterjee, "Commutation torque ripple analysis and reduction through hybrid switching for BLDC motor drives," in Proc. IEEE Region 10 and the 3rd Int. Conf. on Industrial and Information Systems, ICIIS'08, 5 pp., Dec. 2008.
[19] P. Lin, K. Wei, and Z. C. Zhang, "A novel control scheme to suppress the commutation torque ripple in BLDCM," in Proc. of the CSEE, vol. 26, no. 3, pp. 153-158, Feb. 2006.
[20] K. Y. Nam, W. T. Lee, and C. M. Lee, "Reducing torque ripple of brushless DC motor by varying input voltage," IEEE Trans. Magnet., vol. 42, no. 4, pp. 1307-1310, Apr. 2006.
[21] H. F. Lu, L. Zhang, and W. L. Qu, "A new torque control method for torque ripple minimization of BLDC motors with un-ideal back EMF," IEEE Trans. Power Electronics, vol. 23, no. 2, pp. 950-958, Mar. 2008.
[22] P. R. Sultana and P. L. Pathi, "Minimization of torque ripples in BLDC motor using PWM technique," International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, vol. 3, no. 9, pp. 12043-12050, Sep. 2014.
[23] T. Chan, L. Lai, and S. Xie, "Field computation for an axial flux permanent-magnet synchronous generator," IEEE Trans. on Energy Conversion, vol. 24, no. 1, pp. 1-11, Mar. 2009.
[24] Y. Huang, B. Ge, J. Dong, H. Lin, J. Zhu, and Y. Guo, "3-D analytical modeling of no-load magnetic field of ironless axial flux permanent magnet machine," IEEE Trans. on Magnet., vol. 48, no. 11, pp. 2929-2932, Nov. 2012.