مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Cell Association Combined with Interference Management in Heterogeneous Cellular Networks Using a Distributed Algorithmاختصاص سلول توأمان با مدیریت تداخل در شبکههای سلولی ناهمگون با استفاده از الگوریتم توزیعشده145157faمریمچینیپردازسید مجیدنورحسینی2017814Due to the growing demand of cellular networks, the need to increase the capacity of these networks has always been a challenge. Heterogeneous cellular networks using small base stations alongside macro base stations are low cost and effective solutions for this problem. However the differences between the various BSs in heterogeneous networks have created new challenges in terms of cell association and interference management compared with the traditional cellular networks. Therefore, the design of new and efficient methods for allocating cells and resources in these networks is an open research topic. This paper addresses the need for an efficient solution to simultaneously allocating cells and subbands in order to prevent interference for all users. The protocol interference model and its modeling methods in cellular networks have been studied. After modeling the system, the problem is formulated as an integer optimization problem. Then, by reformulating the problem and using a one-level dual decomposition, an algorithm with efficient complexity with near-optimal answers is attained. Thereafter, a distributed protocol is presented in which each user and each base station would only require local information for making decisions. The simulation results confirm the effectiveness of the proposed solution.: به علت رشد درخواست کاربران شبکههای سلولی لزوم افزایش ظرفیت این شبکهها همواره مطرح بوده است. شبکههای سلولی ناهمگون با بهکارگیری ایستگاههای پایه کوچک در کنار ایستگاههای پایه ماکرو راهحلی کمهزینه و موثر برای این منظور میباشند. تفاوت ایستگاههای پایه در شبکههای ناهمگون چالشهای جدیدی در زمینه اختصاص سلول و مدیریت تداخل نسبت به شبکههای همگون ایجاد کرده است. لذا طراحی روشهای جدید و کارامد اختصاص سلول و منابع در این شبکهها از مسائل باز و در حال توسعه میباشد. در این مقاله با توجه به کارهای موجود لزوم ارائه راهحلی کارامد که با اختصاص همزمان سلول و زیرباند مناسب به پیشگیری از تداخل برای تمامی کاربران بپردازد، مطرح شده است. مدل تداخل پروتکل و روشهای مدلسازی آن در شبکههای سلولی مورد بررسی قرار گرفته است. پس از مدلسازی سیستم، مسأله توأمان به صورت یک مسأله بهینهسازی عدد صحیح فرموله شده است. سپس با فرموله کردن مجدد مسأله و استفاده از تجزیه یک سطحی دوگان، الگوریتمی با پیچیدگی کارامد با پاسخهای نزدیک به بهینه بدست آورده میشود. سپس پروتکل توزیعشده مورد نظر ارائه شده که در آن هر کاربر و هر ایستگاه پایه تنها نیازمند اطلاعات محلی خود بوده و به صورت محلی تصمیم میگیرند. نتایچ شبیهسازی کارامدبودن راه حل پیشنهادی را تأیید میکند.http://ijece.org/en/Article/Download/28333مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Performance Analysis of Subband Adaptive Algorithms over Distributed Networks Based on Incremental Strategyبررسی عملکرد الگوریتمهای تطبیقی زیرباند در شبکههای توزیعشده بر پایه روش افزایشی158166faمحمدشمس اسفند آبادیعلیرضاداناییمحمدسعیدشفیعی20161212This paper presents the problem of distributed estimation in an incremental network based on the family of normalized subband adaptive algorithms (NSAAs). The distributed NSAA (dNSAA), the distributed selective partial update NSAA (dSPU-NSAA), the distributed dynamic selection NSAA (dDS-NSAA), and the dSPU-DS-NSAA are introduced in a unified way. The dNSAAs have better convergence speed than distributed normalized least mean square (dNLMS) algorithm especially for colored Gaussian input of the nodes. In comparison with dNSAA, the dSPU-NSAA, and dDS-NSAA have lower computational complexity and close performance to dNSAA. Also by combination of these algorithms, the dSPU-DS-NSAA is established which is computationally efficient. In addition, a unified approach for mean-square performance analysis of each individual node is presented. This approach can be used to establish a performance analysis of classical distributed adaptive algorithms as well. The theoretical expressions for transient, and steady-state performance analysis of the various dNSAAs are introduced. The validity of the theoretical results, and the good performance of these algorithms are demonstrated by several computer simulations.این تحقیق به ارائه مسئله تخمین توزیعشده در یک شبکه افزایشی بر اساس الگوریتمهای خانواده زیرباند نرمالیزهشده (NSAAs) پرداخته است و الگوریتمهای زیرباند نرمالیزهشده توزیعشده (dNSAA)، زیرباند نرمالیزهشده توزیعشده با انتخاب جزئی ضرایب (dSPU-NSAA)، زیرباند نرمالیزهشده توزیعشده با انتخاب پویای زیرباندها (dDS-NSAA) و زیرباند نرمالیزهشده توزیعشده با انتخاب جزئی ضرایب و انتخاب پویای زیرباندها (dSPU-DS-NSAA) را در یک قالب واحد معرفی میکند. الگوریتم زیرباند نرمالیزهشده توزیعشده تطبیقی نسبت به الگوریتم حداقل میانگین مربعات نرمالیزهشده توزیعشده تطبیقی (dNLMS)، دارای عملکرد بهتری از لحاظ سرعت همگرایی در مواجهه با ورودیهای رنگی در گرهها است. در مقایسه با (dNSAA)، الگوریتمهای (dSPU-NSAA) و (dDS-NSAA)، علیرغم عملکردی مشابه دارای پیچیدگی محاسباتی کمتری هستند. همچنین با ترکیب این دو الگوریتم، الگوریتم (dSPU-DS-NSAA) برقرار میشود که از لحاظ پیچیدگی محاسباتی کاهش بیشتری دارد. به علاوه، یک روش واحد برای تحلیل تئوری عملکرد میانگین مربعات برای هر گره ارائه شده و روابط جامعی برای بررسی عملکرد حالت گذرا، ماندگار و باند پایداری برای الگوریتمهای نوین توزیعشده به دست میآید. با انجام شبیهسازیهای مختلف در شبکههای توزیعشده، عملکرد مناسب این الگوریتمها و صحت روابط تئوری حاصلشده مورد بررسی قرار گرفته است.http://ijece.org/en/Article/Download/28334مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Statistical Analysis and Modeling of CMRR and PSRR Random Variations in a Nano-CMOS Transconductance Amplifierتحلیل و مدلسازی آماری تغییرات تصادفی CMRR و PSRR در تقویتکننده هدایت انتقالی فناوری CMOS نانومتری167176faبهروزمحبوبیداریوشدیدبان2015128With advancement of integrated circuit technology and aggressive scaling into nanometer regime, statistical variability in device electrical characteristics caused by discreteness of charge and fabrication process variations has significantly increased. These variations in turn result in fluctuations in output characteristics of important analog building blocks and in particular, amplifiers. In this paper, with the aid of Monte-Carlo simulations for a transconductance amplifier and using 1000 different compact models of MOSFET transistors in 35nm technology node, statistical variations of important circuit parameters are investigated and analyzed based on their statistical distributions. Moreover, statistical correlations between circuit parameters are extracted. Analysis of statistical variations for circuit parameters and their correlations has a direct impact on reduction of cost and time of a design and thus, is of great amount of significance.با پیشرفت فناوری مدارهای مجتمع و ورود ترانزیستورها به مقیاسهای نانومتری، تغییرات آماری مشخصات الکتریکی افزارهها به علت ماهیت گسسته بار و ماده و تغییرات تصادفی ناشی از نوسانات پروسه ساخت به طور چشمگیری افزایش پیدا کرده است. این تغییرات به نوبه خود باعث تغییر در مشخصههای خروجی بلوکهای مهم آنالوگ و علیالخصوص تقویتکنندهها میشود. در این مقاله به کمک شبیهسازی مونتکارلو یک مدار تقویتکننده هدایت انتقالی و استفاده از 1000 مدل فشرده متفاوت برای ترانزیستورهای MOSFET در فناوری 35 نانومتر، تغییرات آماری پارامترهای مهم مدار از لحاظ نحوه توزیع آماری، بررسی و آنالیز گردیده و مدل وابستگی آماری بین پارامترهای مهم مدار نیز استخراج شده است. تحلیل تغییرات آماری پارامترهای خروجی مدار و وابستگی آنها، دارای نتایج مستقیم در کاهش هزینه و زمان طراحی مدار بوده و حایز اهمیت فراوانی است.http://ijece.org/en/Article/Download/28335مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Implementation of Pulse Width Modulation Technique for Achieving Increased Voltage Gain and Balanced Voltage Stress in the A-Source Inverterپیادهسازی روش مدولاسیون پهنای پالس جهت افزایش بهره ولتاژ و متعادلسازی استرس ولتاژ المانها در مبدل A-source177186faفاطمهظهرابیابراهیمعبیری جهرمیامیرحسینرجائی201791The Z-source converter was first introduced as a buck-boost dc-ac single-stage inverter in 2003. Different structures of impedance source inverters have been introduced for improving the performance of power inverters. Due to their specific structure, these inverters use shoot-through state in order to increase the output voltage. Therefore, in addition to improving the reliability of systems, they create a single-stage dc-ac inverter capable of reducing and increasing voltage at the same time. Recently, a three-winding network called the A-source network has been introduced. A new Pulse Width Modulation method has been proposed to improve the voltage gain and reduce switching losses. In this new method, duty cycle of the switch is controlled using the third harmonic injection and the new reference voltages in the three-phase A-source inverter. The proposed modulation method reduces the switching losses and increases voltage gain without adding any additional hardware to the inverter structure. In this method, the buck-boost single-stage structure of the inverter is maintained. In this paper, the proposed method is partially analyzed and compared to the conventional Pulse Width Modulation methods. In this method, the third harmonic injection is used to increase the modulation index to 1.15 and thereby reduce the switching losses. The simulation of the proposed and conventional methods and analyzes, demonstrated the ability of the proposed system.مبدل Z-source به عنوان یک مبدل توان DC به AC باک- بوست تکمرحلهای در سال 2003 مطرح شد. ساختارهای متفاوتی از مبدلهای منبع امپدانس برای بهبود عملکرد مبدلهای توان در مقالههای مختلف معرفی شدهاند. این مبدلها با ساختار خاصی که دارند از اتصال کوتاه برای افزایش ولتاژ خروجی استفاده میکنند و بنابراین ضمن بالابردن قابلیت اطمینان سیستم، تبدیل DC به AC تکمرحلهای را با قابلیت افزایش و کاهش ولتاژ ایجاد میکنند. یکی از مبدلهای منبع امپدانس جدیدی که اخیراً معرفی شده است، مبدل A-source میباشد. برای بهبود توانایی افزایش بهره و کاهش تلفات کلیدزنی، روش جدیدی از مدولاسیون پهنای پالس معرفی میگردد. در این روش با تزریق هارمونیک سوم و تولید ولتاژهای مرجع جدید در مبدل A-source سهفاز، مدت زمان اتصال کوتاه، کنترل میگردد. روش مدولاسیون پیشنهادی، تلفات کلیدزنی را کاهش و بهره ولتاژ را افزایش میدهد، بدون این که سختافزار اضافی به ساختار مبدل اضافه کند. در این روش، همچنان ساختار تکمرحلهای باک- بوستبودن مبدل حفظ شده است. در این مقاله، روش پیشنهادی تحلیل و با روش مدولاسیون پهنای پالس مرسوم مقایسه میشود. همچنین با تزریق هارمونیک سوم، ضریب مدولاسیون به 15/1 افزایش مییابد که باعث کاهش استرس ولتاژ کلیدها میشود. شبیهسازی روش پیشنهادی، روشهای مرسوم، نتایج آن و تحلیلهای صورتگرفته، توانایی سیستم ارائهشده را اثبات میکند.http://ijece.org/en/Article/Download/28336مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Overcurrent Relay Coordination Using Improved Hyper-Spherical Search Algorithm Considering Different Relay Characteristics and Pickup Currentهماهنگي رلههاي جريان زياد توسط الگوريتم جستوجوي ابركره ارتقايافته با درنظرگيري منحني مشخصه رلهها و جريان تنظيمي187195faامیررضاحسنی آهنگرحامدنفيسيحسینکرمیگئوركقرهپتيان2017728Minimization of the discrimination time between the backup and main overcurrent relay is one of the most critical issue in relay coordination of power system. Determination of time setting multipliers (TSMs) using evolutionary algorithms has been studied in previous papers. In this paper, TSM, various characteristics of the overcurrent relays and pickup currents are simultaneously considered to improve coordination of main and backup overcurrent relays. Furthermore, the coordination problem can also be considered as an optimization problem which can be solved using artificial intelligent methods. Recently, a novel optimization algorithm, called hyper-sphere search (HSS) algorithm, has been introduced. In this paper, Improved HSS (IHSS) is introduced. Based on the problems mentioned in this paper, the IHSS algorithm is more appropriate for obtaining the characteristics of the overcurrent relays, pickup currents and their TSMs. The result of IHSS is compared with HSS algorithm which has been used in previous studies. The simulation results on the test network show the efficiency of using IHSS and considering pickup currents in term of better relays coordination.كمينهنمودن اختلاف زمان عملكرد ميان رلههاي جريان زياد اصلي و پشتيبان يكي از موضوعات اساسي و مهم در مسئله هماهنگي رلههاي موجود در سيستم توزيع قدرت است. در اين مقاله، علاوه بر يافتن مقادير ضرايب تنظيم زماني و درنظرگیری انواع منحني مشخصههاي مربوط به رلههاي جريان زياد، جهت بررسي حالت جامع مسئله، جريان تنظيمي رلهها نيز براي بهبود بيشتر هماهنگي به طور همزمان با دو مورد ديگر مورد بررسی قرار ميگيرد. يافتن ميزان بهينه ضريب تنظيم زماني با استفاده از الگوريتمهاي تكاملي در مقالههاي ساليان اخير مورد بررسي قرار گرفته است. اخيراً روش بهينهسازي جديدي به نام الگوريتم جستوجوي ابركره معرفي شده است. در اين مقاله با ارتقای این الگوريتم بهینهسازی، از آن به عنوان كاربرد در یکی از مسایل مهندسی به نام مسئله هماهنگی رلههاي جريان زياد استفاده شده است. نتايج شبيهسازي بر روي شبكه نمونه، كارايي الگوريتم جستوجوي ابركره ارتقایافته را در مقایسه با نسخه اصلی آن نشان خواهد داد. به كارگيري الگوريتم ارتقایافته در کنار درنظرگیری جريان تنظيمي رلهها باعث ميشود تا مسئله هماهنگي بهينه رلههاي جريان زياد در مقایسه با کارهای گذشته بهبود یابد.http://ijece.org/en/Article/Download/28337مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Optimal Operation of AC Microgrid in the Presence of Plug-in Electric Vehicles under Demand Side Managemenبهرهبرداری بهینه ریزشبکه AC در حضور خودروهای برقی تحت مدیریت طرف تقاضا196204faعلیمهدیزادهنویدتقیزادگان کلانتریجوادصالحی2017830In the recent years, integrations of renewable energy sources as well as plug-in electric vehicles are increased in the AC microgrid. Also, demand side management can be used to manage peak load in order to improve optimal performance of AC microgrid. Therefore, this paper proposes optimal operation of AC microgrid in the presence of plug-in electric vehicles under demand side management. The proposed model describes optimal operation of microgrid including the exchange power with the upstream grid, the production of DG units including wind turbines, battery storage, diesel generators, charging and discharging of electric vehicles and the manner of participation of large industrial consumers and aggregators of small consumers in demand side management that minimize the operation cost of microgrid. The proposed formulation is considered the mathematical model of various energy sources in a microgrid and the AC load flow constraints and the bus voltage and feeder current limitations has been considered.In the proposed model, charge and discharge management of plug-in electric vehicles and demand side management are simultaneously proposed to reduce operation cost of AC microgrid subject to technical and economic constraints. A 33-bus microgrid is used as test system in order to investigate effects of plug-in electric vehicles and demand side management on optimal operation of AC microgrid. The proposed model is formulated via mixed-integer non-linear programming which is solved using CPLEX solver under GAMS optimization software.در سالهای اخیر، نفوذ منابع انرژیهای تجدیدپذیر و خودروهای برقی در ریزشبکه AC افزایش یافته است. همچنین مدیریت طرف تقاضا میتواند برای مدیریت بار پیک استفاده شود تا عملکرد بهینه ریزشبکه AC را بهبود دهد. بنابراین، این مقاله بهرهبرداری بهینه ریزشبکه AC در حضور خودروهای برقی تحت مدیریت طرف تقاضا را به طور همزمان پیشنهاد داده است. مدل ارائهشده چگونگی عملکرد کوتاهمدت ریزشبکه را شامل نحوه و میزان تبادل با شبکه بالادست، تولید واحدهایDG شامل توربینهای بادی، باتری ذخیرهساز، دیزل ژنراتورها، شارژ و دشارژ هوشمند خودروهای برقی و نحوه مشارکت مصرفکنندگان بزرگ صنعتی و تجمیعکنندههای مصرفکنندگان کوچک در برنامههای مدیریت طرف تقاضا را به صورتی که هزینه بهرهبرداری ریزشبکه کمینه شود تعیین میکند. فرمولاسیون ارائهشده مدل ریاضی منابع مختلف انرژی را در ریزشبکه مدل کرده و قیود پخش بار AC و محدودیت ولتاژ شینها و جریان فیدرها را در ریزشبکه در نظر گرفته است. ریزشبکه 33 شین AC به عنوان تست سیستم استفاده میشود تا اثرات خودروهای برقی و مدیریت طرف تقاضا را روی بهرهبرداری بهینه ریزشبکه AC بررسی کند. مدل پیشنهادی به شکل برنامهریزی غیر خطی آمیخته با اعداد صحیح مدلسازی شده و با استفاده از حلکننده SBB تحت نرمافزار بهینهسازی GAMS حل شده است.http://ijece.org/en/Article/Download/28338مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Close Loop Identification for Combustion System by Recurrent Adaptive Neuro-Fuzzy Inference System and Network with Exogenous Inputsشناسایی حلقه بسته سیستم احتراق با استفاده از سیستم استنباط فازی- عصبی تطبیقی بازگشتی و شبکه با ورودیهای برونزا205212faاحسانآقاداودیغضنفرشاهقلیان20161111Boiler-turbine is a multi-variable and complicated system in steam power plants including combustion, temperature and drum water level. Selecting control loops as a unique loop in order to identify and control the boiler as a whole unit is a difficult and complicated task, because of nonlinear time variant dynamic characteristics of the boiler. It is necessary to identify each control group in order to accomplish a realistic and effective model, appropriate for designing an efficient controller. Both the effective and efficient performance of the identified model during the load change is of major importance. Here, not all parts of the system should be considered as a unit part, if determining and effective and realistic model is sought. The combustion loop of the 320 MW steam power plant of Islam Abad, Isfahan is the subject. Due to the sensitivity and complexity of the system, with respect to its nonlinear and closed loop characteristics, the identification of the system is conducted through intelligent procedures like recurrent adaptive neuro-fuzzy inference system (RANFIS) and nonlinear autoregressive model with exogenous input (NARX). The comparisons of the findings with actual data collected from the plant are presented and the accuracy of the procedures is determined.بویلر- توربین یک سیستم چندمتغیره و پیچیده در نیروگاههای بخار است و از سه حلقه کنترل اصلی و مجزای احتراق، دما و سطح آب درام تشکیل شده است. انتخاب حلقههای کنترلی به عنوان یک حلقه واحد به منظور کنترل و شناسایی بویلر به صورت یکپارچه، به علت حضور مشخصههای دینامیکی غیر خطی متغیر با زمان بسیار سخت و پیچیده خواهد بود. بنابراین برای تحقق یک مدل واقعی و دقیق برای طراحی کنترلکننده مناسب، هر حلقه کنترلی باید جداگانه شناسایی شود. همچنین عملکرد مؤثر و کارامد مدل شناساییشده در زمان تغییرات بار نیز حایز اهمیت است. در این مقاله شناسایی حلقه بسته سیستم احتراق ارائه شده است. با توجه به حساسیت، پیچیدگی، غیر خطی و حلقه بسته بودن سیستم، شناسایی سیستم با استفاده از روشهای هوشمند مانند سیستم استنباط فازی- عصبی تطبیقی (ANFIS) بازگشتی و شبکه با ورودیهای برونزا (NARX) سری- موازی انجام میگیرد. در انتها مقایسه نتایج دو روش با یکدیگر و همچنین مقایسه با دادههای واقعی نمونهبرداری شده از بویلر واحد 320 مگاوات نیروگاه بخار اصفهان- ایران ارائه شده و دقت روشها نشان داده میشود.http://ijece.org/en/Article/Download/28339مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Design of Parity Preserving Reversible Signed Multiplier Circuitطراحی مدار ضربکننده موازی علامتدار برگشتپذیر با قابلیت حفظ توازن213220faمجیدحق پرستعلیبوالحسنی2017219One of the major challenges and constraints in designing very large integrated circuits is the power dissipation of transistors. Reversible logic is one of the new paradigm in reducing the power consumption of digital circuits in the quantum computing field. In this paper, an improved design of a parallel 5-bit parity preserving reversible signed multiplier circuit is presented. Reversible circuit designs with parity preserving property are an important issue for the implementation of fault tolerant systems in nanotechnology area. To design of the proposed multiplier, the reversible full adder circuit using 5×5 reversible HBF block with low quantum cost, and the 4×4 reversible HBL gate, with parity preserving property are proposed. The structure of the multiplier circuit consists of two parts of the partial product generation (PPG) and multi-operand addition (MOA). This structure is based on Baugh-Wooley and Wallace-Tree algorithms, which results in improved speed of operation in a 5-bit multiplier for signed digits. The proposed circuits are optimized based on important evaluation issues such as quantum cost, garbage outputs and constant inputs, and also are compared with the existing circuits. The main goal is to reduce the quantum cost, the number of constant inputs and garbage outputs in the design of the proposed multiplier circuit. The results of the final evaluation and comparison shows that the proposed multiplier in this study is improved by 26% in quantum cost, 9% in garbage outputs and 9% in constant inputs relative to the best existing designs.یکی از چالشها و محدودیتهای مهم در طراحی مدارهای پرتراکم، اتلاف توان ناشی از ترانزیستورهای این مدارها است. منطق برگشتپذیر یکی از رویکردهای نوین در کاهش اتلاف توان مدارهای دیجیتال در حوزه محاسبات کوانتومی است. در این مقاله طرحی بهبودیافته از یک مدار موازی ضربکننده علامتدار 5بیتی با ویژگی حفظ توازن ارائه میشود. مدارهای برگشتپذیر با قابلیت حفظ توازن یک ویژگی مهم برای پیادهسازی سیستمهای تحملپذیر اشکال در حوزه فناوری نانو است. برای طراحی ضربکننده پیشنهادی، یک بلوک 5×5 برگشتپذیر به نام HBF برای طراحی یک جمعکننده کامل برگشتپذیر با هزینه کوانتومی مناسب و یک دروازه 4×4 برگشتپذیر به نام HBL ارائه شدهاند. ساختار مدار ضربکننده از دو بخش تولید حاصلضربهای جزئی (PPG) و عملوندهای چندگانه افزوده (MOA) تشکیل شده است. این ساختار مبتنی بر الگوریتمهای Baugh-Wooley و درخت والاس بوده که منجر به بهبود سرعت عملیات در ضربکننده 5بیتی باینری برای اعداد علامتدار میشود. مدارهای پیشنهادی بر مبنای معیارهای ارزیابی مهمی همچون هزینه کوانتومی، خروجیهای بیاهمیت و ورودیهای ثابت، بهینهسازی شده و با مدارهای موجود مقایسه میشوند. هدف اصلی، کاهش هزینه کوانتومی، تعداد ورودیهای ثابت و خروجیهای بیاهمیت در طراحی مدار ضربکننده پیشنهادی است. نتایج ارزیابی و مقایسه نهایی نشان میدهد که ضربکننده 5×5 پیشنهادی در این پژوهش، 26% در هزینه کوانتومی، 9% در خروجیهای بیاهمیت و 9% در ورودیهای ثابت نسبت به بهترین طرحهای موجود، بهبود یافته است.http://ijece.org/en/Article/Download/28340مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه مهندسی برق و مهندسی کامپيوتر ايران16823745163201911Design, Simulation and Implementation of a Compact, 6-Way Wilkinson Power Divider Using Composite Linesطراحی، شبیهسازی و ساخت یک تقسیمکننده توان ویلکینسون فشرده ششخروجی با استفاده از خطوط مرکب221226faمسعودحیدریسعیدروشنی2017526In this paper a novel compact 6-way Wilkinson power divider coupler (WPD) using composite lines is proposed, simulated and fabricated. The proposed structure consists of a 2-way divider and two 3-way dividers. The applied dividers have equal division ratios. In the proposed structure long quadrature wavelength lines are replaced with small composite lines, which results in size reduction and harmonics suppression. Moreover for improved output ports isolations a resistor and a capacitor are used together. The designed device correctly works on 5.1 GHzدر این مقاله یک ساختار مقسم توان ویلکینسون فشرده با بهرهگیری از عناصر پسیو طراحی، شبیهسازی و ساخته شده است. ساختار پیشنهادی از یک مقسم توان با دو دهانه خروجی و دو مقسم توان که هر یک دارای سه خروجی برای تقسیم توان میباشند تشکیل شده است. تقسیمکنندههای استفادهشده در این طرح از نوع ویلکینسون و متقارن هستند، از این مدار میتوان برای تقسیم توان بین شش خروجی به صورت متقارن با تلفات کم بهره برد. در طرح پیشنهادی به جای استفاده از خطوط الکتریکی 4/λ از خطوط مرکب استفاده شده، همچنین برای ایزولاسیون بین خروجیهای مقسمی که دارای دو دهانه برای تقسیم توان است از یک مقاومت و خازن استفاده شده، که این امر باعث کاهش ابعاد و همچنین کاهش مجموع طول الکتریکی خطوط و بهبود ایزولاسیون شده است. مدار طراحی شده در فرکانس کاری ۵/۱ گیگاهرتز شبیهسازی و اندازهگیری شده که نتایج تحلیل مدار در این مقاله قرار داده شده است.http://ijece.org/en/Article/Download/28341