ijece-202605192220260519223113CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagNashriyyah -i Muhandisi -i Barq va Muhandisi -i Kampyutar -i Iranijece1682374512132025232S. F.MousaviS. A.SadrossadatA.Moftakharzadeh1213202511712610.66224/ijece.48062.23.2.117http://ijece.org/en/Article/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062http://ijece.org/en/Article/Download/48062[1] V. K. Devabhaktuni, M. C. Yagoub, Y. Fang, J. Xu, and Q. J. Zhang, "Neural networks for microwave modeling: Model development issues and nonlinear modeling techniques," International Journal of RF and Microwave Computer-Aided Engineering, vol. 11, no. 1, pp. 4-21, 2001. [2] Q. -J. Zhang and K. C. Gupta, Neural Networks for RF and Microwave Design (Book+ Neuromodeler Disk). Artech House, Inc., 2000. [3] W. Liu, W. Na, L. Zhu, and Q.-J. Zhang, "A review of neural network based techniques for nonlinear microwave device modeling," in Proc. IEEE MTT-S Int. Conf. on Numerical Electromagnetic and Multiphysics Modeling and Optimization, 2 pp., Beijing, China, 27-29 Jul. 2016. [4] A. Rawat, R. Yadav, and S. Shrivastava, "Neural network applications in smart antenna arrays: A review," AEU-International Journal of Electronics and Communications, vol. 66, no. 11, pp. 903-912, Nov. 2012. [5] S. A. Sadrossadat, P. Gunupudi, and Q. -J. Zhang, "Nonlinear electronic/photonic component modeling using adjoint state-space dynamic neural network technique," IEEE Trans. on Components, Packaging and Manufacturing Technology, vol. 5, no. 11, pp. 1679-1693, Nov. 2015. [6] W. Na, F. Feng, C. Zhang, and Q. -J. Zhang, "A unified automated parametric modeling algorithm using knowledge-based neural network and l1 optimization," IEEE Trans. on Microwave Theory and Techniques, vol. 65, no. 3, pp. 729-745, Mar. 2016. [7] H. Zhang, Y. Jing, and P. Zhou, "Machine learning-based device modeling and performance optimization for FinFETs," IEEE Trans. on Circuits and Systems II: Express Briefs, vol. 70, no. 4, pp. 1589-1585, Apr. 2022. [8] H. Kabir, et al., "Smart modeling of microwave devices," IEEE Microwave Magazine, vol. 11, no. 3, pp. 105-118, 2010. [9] B. Mutnury, et al, "Macromodeling of nonlinear transistor-level receiver circuits," IEEE Trans. on Advanced Packaging, vol. 29, no. 1, pp. 55-66, Feb. 2006. [10] M. Noohi, A. Mirvakili, and S. A. Sadrossadat, "Modeling and implementation of nonlinear boost converter using local feedback deep recurrent neural network for voltage balancing in energy harvesting applications," International Journal of Circuit Theory and Applications, vol. 49, no. 12, pp. 4231-4247, Dec. 2021. [11] R. Dinesh and R. Marimuthu, "An analysis of ADPLL applications in various fields," Indonesian Journal of Electrical Engineering and Computer Science, vol. 18, no. 2, pp. 856-866, May 2020. [12] P. K. Hanumolu, G. -Y. Wei, U. -K. Moon, and K. Mayaram, "Digitally-enhanced phase-locking circuits," in Proc. IEEE Custom Integrated Circuits Conf., pp. 361-368, San Jose, CA, USA, 16-19 Sept. 2007. [13] M. Moradi, S. A. Sadrossadat, and V. Derhami, "Long short-term memory neural networks for modeling nonlinear electronic components," IEEE Trans. on Components, Packaging and Manufacturing Technology, vol. 11, no. 5, pp. 840-847, May 2021. [14] M. Azodi, S. A. Sadrossadat, and Y. Savaria, "Nonlinear circuit macromodeling using new heterogeneous-layered deep clockwork recurrent neural network," IEEE Access, pp. 89506-89519, 2024. [15] T. Kandadi and G. Shankarlingam, Drawbacks of LSTM Algorithm: A Case Study, Available at SSRN, no. 5080605, Jan. 2025, http://dx.doi.org/10.2139/ssrn.5080605. [16] H. Ibrahim et al., "Radio frequency energy harvesting technologies: A comprehensive review on designing, methodologies, and potential applications," Sensors, vol. 22, no. 11, Article ID: 4144, 2022. [17] L. G. B. Rolim, D. R. da Costa, and M. Aredes, "Analysis and software implementation of a robust synchronizing PLL circuit based on the pq theory," IEEE Trans. on Industrial Electronics, vol. 53, no. 6, pp. 1919-1926, Dec. 2006. [18] S. AI-Araji, Z. M. Hussain, and M. AI-Qutairi, Digital Phase Locked Loops, Architecture and Applications, Springer, Berlin, 2006. [19] R. J. Baker, CMOS: Circuit Design, Layout, and Simulation, John Wiley & Sons, 2019. [20] D. Banerjee, PLL Performance, Simulation and Design, Dog Ear Publishing, 2006. [21] R. I. Abdo, A. A. Khalaf, and H. F. A. Hamed, "A power efficient and fast locking CMOS design of all-digital phase-locked loop," Journal of Advanced Engineering Trends, vol. 42, no. 1, pp. 197-203, Jan. 2022. [22] Y. Fang, M. C. Yagoub, F. Wang, and Q. -J. Zhang, "A new macromodeling approach for nonlinear microwave circuits based on recurrent neural networks," IEEE Trans. on Microwave Theory and Techniques, vol. 48, no. 12, pp. 2335-2344, Dec. 2000. [23] Z. Naghibi, S. A. Sadrossadat, and S. Safari, "Time-domain modeling of nonlinear circuits using deep recurrent neural network technique," AEU-International Journal of Electronics and Communications, vol. 100, pp. 66-74, Feb. 2019. [24] J. Chung, Empirical Evaluation of Gated Recurrent Neural Networks on Sequence Modeling, arXiv preprint arXiv:1412.3555, 2014. [25] R. Fu, Z. Zhang, and L. Li, "Using LSTM and GRU neural network methods for traffic flow prediction," in Proc. 31st Youth Academic Annual Conf. of Chinese Association of Automation, pp. 324-328, Wuhan, China, 11-13 Nov. 2016. [26] J. Yuan and Y. Tian, "An intelligent fault diagnosis method using GRU neural network towards sequential data in dynamic processes," Processes, vol. 7, no. 3, Article ID: 152, 2019. [27] T. Robert, M. Safaryan, I. V. Modoranu, and D. Alistarh, LDAdam: Adaptive Optimization from Low-Dimensional Gradient Statistics, arXiv preprint arXiv:2410.16103, Oct. 21, 2024.S. H.ZahiriEhsanHaghparastAbolfazlBijari1213202512713710.66224/ijece.49064.23.2.127http://ijece.org/en/Article/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064http://ijece.org/en/Article/Download/49064 [1] Lai, Y., Liu, J., Tang, Z., Wang, B., Hao, J., & Luo, P. (2023, July). Chipformer: Transferable chip placement via offline decision transformer. In International Conference on Machine Learning (pp. 18346-18364). PMLR. [2] Gaber L, Hussein AI, Moness M (2019) Improved automatic correction for digital VLSI circuits. In 2019 Proceeding 31st international conference on microelectronics (ICM), 2019, pp 18–22. [3] Shanthi, J., Rani, D. G. N., & Rajaram, S. (2022). A C4. 5 decision tree classifier based floorplanning algorithm for System-on-Chip design. Microelectronics journal, 121, 105361. [4] Alateeq, M., & Pedrycz, W. (2021). A comparative analysis of bio-inspired optimization algorithms for automated test pattern generation in sequential circuits. Applied Soft Computing, 101, 106967. [5] Lee, S. H., Lee, S. J., Park, J., Lee, E. C., & Kang, H. G. (2018). Development of simulation-based testing environment for safety-critical software. Nuclear Engineering and Technology, 50(4), 570-581. [6] Gaudesi, M., Pomeranz, I., Reorda, M. S., & Squillero, G. (2016). New techniques to reduce the execution time of functional test programs. IEEE Transactions on Computers, 66(7), 1268-1273. [7] Letia, T. S., & Kilyen, A. O. (2016, May). Fuzzy logic enhanced time Petri Net models for hybrid control systems. In 2016 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR) (pp. 1-6). IEEE. [8] Gaudesi, M., Pomeranz, I., Reorda, M. S., & Squillero, G. (2016). New techniques to reduce the execution time of functional test programs. IEEE Transactions on Computers, 66(7), 1268-1273. [9] Gaudesi, M., Reorda, M. S., & Pomeranz, I. (2015, May). On test program compaction. In 2015 20th IEEE European Test Symposium (ETS) (pp. 1-6). IEEE. [10] Eggersglüß, S., Milewski, S., Rajski, J., & Tyszer, J. (2021, October). On reduction of deterministic test pattern sets. In 2021 IEEE International Test Conference (ITC) (pp. 260-267). IEEE. [11] Gaudesi, M., Reorda, M. S., & Pomeranz, I. (2015, May). On test program compaction. In 2015 20th IEEE European Test Symposium (ETS) (pp. 1-6). IEEE. [12] Wang, P., Moore, C. J., Gharehbaghi, A. M., & Fujita, M. (2017). An ATPG method for double stuck-at faults by analyzing propagation paths of single faults. IEEE Transactions on Circuits and Systems I: Regular Papers, 65(3), 1063-1074. [13] Malihi, L., & Malihi, R. (2020). Single stuck-at-faults detection using test generation vector and deep stacked-sparse-autoencoder. SN Applied Sciences, 2(10), 1715. [14] Shah, T., Matrosova, A., Fujita, M., & Singh, V. (2018). Multiple stuck-at fault testability analysis of ROBDD based combinational circuit design. Journal of Electronic Testing, 34, 53-65. [15] Singh, V. K., Sarkar, T., & Pradhan, S. N. (2022). Power-aware testing for maximum fault coverage in analog and digital circuits simultaneously. IETE Technical Review, 39(6), 1395-1409. [16] Gaber, L., Hussein, A. I., & Moness, M. (2021). Fault detection based on deep learning for digital VLSI circuits. Procedia Computer Science, 194, 122-131. [17] Hu, H., Feng, F., & Wang, T. (2020). Open-circuit fault diagnosis of NPC inverter IGBT based on independent component analysis and neural network. Energy Reports , 6 , 134-143. [18] Wang T, Xu H, Han J et al (2015) Cascaded H-bridge multilevel inverter system fault diagnosis using a PCA and multi-class relevance vector machine approach. IEEE Trans Power Electr 30(12):1. [19] Yin, Z., Wang, L., Zhang, Y., & Gao, Y. (2019). A novel arc fault detection method integrated random forest, improved multi-scale permutation entropy and wavelet packet transform. Electronics, 8(4), 396. [20] Simonyan K, Zisserman A (2015) Very deep convolutional networks for large-scale image recognition. arXiv preprint arXiv :1409.1556. [21] Wu, Z., Pan, S., Chen, F., Long, G., Zhang, C., & Philip, S. Y. (2020). A comprehensive survey on graph neural networks. IEEE transactions on neural networks and learning systems, 32(1), 4-24. [22] Wu, H., & Zhao, J. (2018). Deep convolutional neural network model based chemical process fault diagnosis. Computers & chemical engineering, 115, 185-197. [23] Zhang Z, Zhao J (2017) A deep belief networkbased fault diagnosis model for complex chemical processes. Comput Chem Eng 107:395–407. [24] Liu, W., Wang, Z., Liu, X., Zeng, N., Liu, Y., & Alsaadi, F. E. (2017). A survey of deep neural network architectures and their applications. Neurocomputing, 234, 11-26. [25] Wang, H., Fu, T., Du, Y., Gao, W., Huang, K., Liu, Z., ... & Zitnik, M. (2023). Scientific discovery in the age of artificial intelligence. Nature, 620(7972), 47-60. [26] Sarker, I. H. (2021). Machine learning: Algorithms, real-world applications and research directions. SN computer science, 2(3), 160. [27] Xie Y, Zeng H, Hu C, Ji Z (2019) Security/timming-aware design space exploration of CAN FD for automative cyber-phsical systems. IEEE Trans Ind Inf 15(2):1094–1104. [28] Xiao H, Cao M, Peng R (2020) Artificial neural networkbased software fault detection and correction prediction models considering testing effort. Appl Soft Comput 94:106491. [29] Jiang W, Wen L, Zhan J, Jiang K (2020) Design optimization of confidentiality-critical cyber physical systems with fault detection. J Syst Archit 107:101739. [30] Md Younus Ali, Raimund Ubar, (2020) TESTIDE GENEREERIMINE VIIVITUSRIKETELE DIGITAALSKEEMIDES, Tallinn University of Technology. [31] Miller, D. M., & Thornton, M. A. (2022). Multiple-Valued Logic: Concepts and Representations. Springer Nature. [32] Dorf, R. C. (2018). The Electrical Engineering Handbook-Six Volume Set. CRC press. [33] Fujiwara H (1985) Fan: a fanout-oriented test pattern generation algorithm. In: Proceedings of IEEE international symposium circuits system, pp 671–674. [34] Khan, S., & Sarkar, P. (2023, December). A Comprehensive Review of Machine Learning Applications in VLSI Testing: Unveiling the Future of Semiconductor Manufacturing. In 2023 7th International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech) (pp. 1-5). IEEE.H.KavoshM.Saradarzadeh1213202510711610.66224/ijece.49084.23.2.107http://ijece.org/en/Article/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084http://ijece.org/en/Article/Download/49084[1] X. She, A. Q. Huang and R. Burgos, "Review of solid-state transformer technologies and their application in power distribution systems," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 1, no. 3, pp. 186-198, Sept. 2013. [2] J. E. Huber and J. W. Kolar, "Solid-state transformers: On the origins and evolution of key concepts," IEEE Industrial Electronics Magazine, vol. 10, no. 3, pp. 19-28, Sept. 2016. [3] A. Q. Huang, "Medium-voltage solid-state transformer: Technology for a smarter and resilient grid," IEEE Industrial Electronics Magazine, vol. 10, no. 3, pp. 29-42, Oct. 2016. [4] S. Madhusoodhanan et al., "Solid-state transformer and MV grid tie applications enabled by 15 kV SiC IGBTs and 10 kV SiC MOSFETs based multilevel converters," IEEE Trans. on Industry Applications, vol. 51, no. 4, pp. 3343-3360, Sept. 2015. [5] X. Wang, J. Liu, S. Ouyang, T. Xu, F. Meng and S. Song, "Control and Experiment of an H-Bridge-Based Three-Phase Three-Stage Modular Power Electronic Transformer," IEEE Trans. on Power Electronics, vol. 31, no. 3, pp. 2002-2011, Ma. 2016. [6] C. Gu, Z. Zheng, L. Xu, K. Wang and Y. Li, "Modeling and control of a multiport power electronic transformer (PET) for electric traction applications," IEEE Trans. on Power Electronics, vol. 31, no. 2, pp. 915-927, Feb. 2016. [7] N. Zhao, J. Liu, Y. Ai, J. Yang, J. Zhang and X. You, "Power-linked predictive control strategy for power electronic traction transformer," IEEE Trans. on Power Electronics, vol. 35, no. 6, pp. 6559-6571, Jun. 2020. [8] J. E. Huber and J. W. Kolar, "Volume/weight/cost comparison of a 1 MVA 10 kV/400 V solid-state against a conventional low-frequency distribution transformer," in Proc. IEEE Energy Conversion Congress and Exposition, pp. 4545-4552, Pittsburgh, PA, USA, 14-18 Sept. 2014. [9] R. Pena-Alzola, G. Gohil, L. Mathe, M. Liserre, and F. Blaabjerg, "Review of modular power converters solutions for smart transformer in distribution system," in Proc. IEEE Energy Conversion Congress and Exposition, pp. 380-387, Denver, CO, USA, 15-19 Sept. 2013. [10] F. Briz, M. Lopez, A. Rodriguez, and M. Arias, "Modular power electronic transformers: Modular multilevel converter versus cascaded H-bridge solutions," IEEE Industrial Electronics Magazine, vol. 10, no. 4, pp. 6-19, Dec. 2016. [11] Y. Ai, J. Liu, S. Chen, Y. Shi, and C. Pei, "An improved DC power electronic transformer based on voltage balancing converter for bipolar distribution system," IEEE Trans. on Industrial Electronics, vol. 70, no. 12, pp. , Dec. 2023. [12] R. Wang et al., "A high power density single-phase PWM rectifier with active ripple energy storage," IEEE Transactions on Power Electronics, vol. 26, no. 5, pp. 1430-1443, May. 2010. [13] H. Li, K. Zhang, and H. Zhao, "DC-link active power filter for high-power single-phase PWM converters," Journal of Power Electronics, vol. 12, no. 3, pp. 458-467, May 2012. [14] B. Liu, W. Song, J. Ma, X. Feng, and W. Li, "Dynamic performance improvement of single‐phase PWM converters with power hysteresis control scheme," IET Power Electronics, vol. 11, no. 12, pp. 1894-1902, 2018. [15] L. Zhang and X. Ruan, "Control schemes for reducing second harmonic current in two-stage single-phase converter: An overview from DC-bus port-impedance characteristics," IEEE Trans. on Power Electronics, vol. 34, no. 10, pp. 10341-10358, Oct. 2019. [16] Y. Xia, J. Roy and R. Ayyanar, "A capacitance-minimized, doubly grounded transformer less photovoltaic inverter with iInherent active-power decoupling," IEEE Trans. on Power Electronics, vol. 32, no. 7, pp. 5188-5201, Jul. 2017. [17] P. K. Achanta, B. B. Johnson, G. -S. Seo and D. Maksimovic, "A multilevel DC to three-phase AC architecture for photovoltaic power plants," IEEE Trans. on Energy Conversion, vol. 34, no. 1, pp. 181-190, Mar. 2019. [18] X. Li, L. Cheng, L. He, Z. Zhu, Y. Yang, and C. Wang, "Capacitor voltage ripple minimization of a modular three-phase AC/DC power electronics transformer with four-winding power channel," IEEE Access, vol. 8, pp. 119594-119608, 2020. [19] W. Wen, K. Li, Z. Zhao, L. Yuan, X. Mo, and W. Cai, "Analysis and control of a four-port megawatt-level high-frequency-bus-based power electronic transformer," IEEE Trans. on Power Electronics, vol. 36, no. 11, pp. 13080-13095, Nov. 2021. [20] M. Feng, C. Gao, J. Xu, C. Zhao and G. Li, "Modeling for complex modular power electronic transformers using parallel computing," IEEE Trans. on Industrial Electronics, vol. 70, no. 3, pp. 2639-2651, Mar. 2023. [21] S. Falcones, R. Ayyanar and X. Mao, "A DC–DC multiport-converter-based solid-state transformer integrating distributed generation and storage," IEEE Trans. on Power Electronics, vol. 28, no. 5, pp. 2192-2203, May 2013. [22] T. O. Olowu, H. Jafari, M. Moghaddami and A. I. Sarwat, "Multiphysics and multiobjective design optimization of high-frequency transformers for solid-state transformer applications," IEEE Trans. on Industry Applications, vol. 57, no. 1, pp. 1014-1023, Jan.-Feb. 2021. [23] Y. Cai, et al., "Magnetic integration for a dual active bridge converter planar transformer with accurate leakage inductances estimation," IEEE Access, vol. 12, pp. 112278-112289, 2024. [24] L. Zheng, et al., "7.2 kV Three-port SiC single-stage current-source solid-state transformer with 90 kV lightning protection," lIEEE Trans. on Power Electronics, vol. 37, no. 10, pp. 12080-12094, Oct. 2022. [25] Z. Zhao et al., "Design and Demonstration of a 100 kW High-Frequency Matrix Core Transformer for More Electric Aircraft Power Distribution," IEEE Trans. on Transportation Electrification, vol. 8, no. 4, pp. 4279-4290, Dec. 2022.V.RanjbarizadE.Babaei1213202513814410.66224/ijece.49099.23.2.138http://ijece.org/en/Article/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099http://ijece.org/en/Article/Download/49099[1] Z. Wang, Y. Yan, J. Yang, S. Li, and Q. Li, "Robust voltage regulation of a DC-AC inverter with load variations via a HDOBC approach," IEEE Trans. on Circuits and Systems, vol. 66, no. 7, pp. 1172-1176, Jul. 2019. [2] D. Sun, B. Ge, W. Liang, H. Abu-Rub, and F. Z. Peng, "An energy stored quasi-Z-source cascade multilevel inverter-based photovoltaic power generation system," IEEE Trans. on Industrial Electronics, vol. 62, no. 9, pp. 5458-5467, Sept. 2015. [3] S. Hu, Z. Liang, and X. He, "Ultra capacitor-battery hybrid energy storage system based on the asymmetric bi-directional Z-source topology for EV," IEEE Trans. Power Electronics, vol. 31, no. 11, pp. 7489-7498, 2016. [4] F. Z. Peng, "Z-source inverter," IEEE Trans. on Industrial Electronics, vol. 39, no. 2, pp. 504-510, Mar. 2003. [5] J. Anderson and F.Z. Peng, "Four quasi-Z-source inverters," in Proc. IEEE Power Power Electronics Specialists Conf., pp. 2743-2749, Rhodes, Greece, 15-19 Jun. 2008. [6] M. Zhu, K. Yu, and F.L. Luo, "Switched inductor Z-source inverter," IEEE Trans. Power Electronics, vol. 25, no. 8, pp. 2150-2158, Aug. 2010. [7] E. Babaei, M. Hasan Babayi, E. Shokati Asl, and S. Laali "A new topology for Z-source inverter based on switched-inductor and boost Z-source inverter, " Journal of Operation and Automation in Power Engineering, vol. 3, no. 2, pp. 16784, Sept. 2015. [8] M. K. Nguyen, Y. C. Lim, and S. J. Park, "Improved trans-Z-source inverter with continuous input current and boost inversion capability," IEEE Trans. on Industrial Electronics, vol. 28, no. 10, pp. 4500-4510, Oct. 2013. [9] W. Mo, P.C. Loh, and F. Blaabjerg, “Voltage type Γ-source inverters with continuous input current and enhanced voltage boost capability,” in Proc. of 15th Int. Power Electronics and Motion Control Conf., 8 pp., Novi Sad, Serbia, 4-6 Sept. 2012. [10] M.K. Nguyen, Y. C. Lim and Y. G. Kim, "TZ-source inverters," IEEE Trans. on Industrial Electronics, vol. 60, no. 12, pp. 5686-5695, Dec. 2013. [11] Y.P. Siwakoti, P.C. Loh, F. Blaabjerg, and G. E. Town, "Y-source impedance network," IEEE Trans. on Industrial Electronics, (Letter), vol. 29, no. 7, pp. 3250-3254, Jul. 2014. [12] A. Ahmad, R. K. Singh, and A. R. Beig, "Switched-capacitor based modified extended high gain switched boost Z-source inverters," IEEE Trans. on Industrial Electronics, vol. 7, pp. 179918-79928, Dec. 2019. [13] D. Li, P.C. Loh, F. Gao, and F. Blaabjerg, "Generalized multicell switched-inductor and switched-capacitor Z-source inverters," IEEE Trans. Power Electron., vol. 28, no. 2, pp. 837-848, Feb. 2013. [14] A. Ravindranath, S.K. Mishra, and A. Joshi, "Analysis and PWM control of switched boost inverter," IEEE Trans. on Industrial Electronics, vol. 60, no. 12, pp. 5593-5602, Nov. 2013. [15] M. Abbasi, M. Mardaneh, and E. Jamshidpour, "High gain PWM method and active switched boost Z-source inverter with less voltage stress on the devices," IEEE Transactions on Power Electronics, vol. 37, no. 2, pp. 1841-1851, Feb. 2022. [16] M. Abbasi, M. Mardaneh, and E. Babaei, "Active-switched boost quasi-Z-source inverter with few components," Electrical Engineering, vol. 103, pp. 303-314, Feb. 2021. [17] P.K. Gayen, "An enhanced high-boost active-switched quasi Z-Source inverter having shorter range of shoot-through duty ratio for solar energy conversion applications," Int. J. Electron. Commun., vol. 137, Article ID: 153822, Jul. 2021. [18] X. Pan, Z. Pang, Y. Liu, S. Yin, and C. Ju, "Enhanced-Boost Bi-directional Quasi Z-Source Inverter with Novel Active Switched Inductor Cells," IEEE Access, vol. 8, pp. 3041-3055, 2020. [19] V. Ranjbarizad, E. Babaei, and C. Cecati, "Embedded Active Impedance Source Inverter Analysis and implementation," International Journal of Circuit Theory and Applications. vol. 51, no. 2, pp. 728- 749, Feb. 2023. [20] V. Ranjbarizad and E. Babaei, "A new class of active impedance source inverter with low voltage stress on semiconductors," International Journal of Circuit Theory and Applications, vol. 52, no. 10, pp. 5074-5106, Oct. 2024. [21] E. Babaei and E. Shokati Asl, "A new topology for Z-source half-bridge inverter with low voltage stress on capacitors," Electric Power Systems Research, vol. 140, pp. 722-734, Nov. 2016.M.SalmanfarA.Dehestani KolagarMohammad Reza Alizadeh PahlavaniYousef Koohmaska121320259510610.66224/ijece.49594.23.2.95http://ijece.org/en/Article/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594http://ijece.org/en/Article/Download/49594[1] S. A. Rizvi and A. Y. Memon, "An extended observer-based robust nonlinear speed sensorless controller for a PMSM," International Journal of Control, vol. 92, no. 9, pp, 2123-2135, 2019. [2] C. Ogbuka, C. Nwosu, and M.Agu, "A fast hysteresis current–controlled permanent magnet synchronous motor drive based on field orientation," Journal of Electrical Engineering, vol. 67, no. 2, pp. 69-77, Apr. 2016. [3] F. Tahami, H. Nademi, and M. Rezaei, "Maximum torque per ampere control of permanent magnet synchronous motor using genetic algorithm," Telekomnika, vol. 9, no. 2, pp. 237-244, Aug. 2011. [4] M. Dursun and A. Fuat Boz, "The analysis of different techniques for speed control of permanent magnet synchronous motor," Technical Gazette, vol. 22, no. 4, pp. 947-952, 2015.‏ [5] E. Ojionuka, et al., "A simplified sensorless speed control of permanent magnet synchronous motor using model reference adaptive system," Journal of Electrical Engineering, vol. 70, no. 6, pp. 473-479, 2019. ‏ [6] Q. Ji, X. Ruan, and Y. Zhihong,"The worst conducted EMI spectrum of critical conduction mode boost PFC converter," IEEE Trans. on Power Electronics, vol. 30, no. 3, pp. 1230-1241, Mar. 2015. [7] J.Besnerais, et al., "Characterization and reduction of audible magnetic noise due to PWM supply in induction machines," IEEE Trans. on Industrial Electronics, vol. 57, no. 4, pp. 1288-1295, Apr. 2010. [8] A. M. Trzynadlowski, S. Legowski, and R. L.Kirlin, "Random pulse-width modulation technique for voltage-controlled power inverters," International Journal of Electronics Theoretical and Experimental, vol. 68, no. 6, pp. 1027-1037, 1990. [9] W. Bin, L. Xinyuan, and K.Drissi, "Analysis of power spectrum of a dual randomized modulation (DRM)," Proceeding-Chinese Society of Electrical Engineering, vol. 24, no. 4, pp. 97-101, 2004.‏ [10] M. Kazmierkowski and L. Malesani, "Current control techniques for three-phase voltage-source PWM converters: A survey," IEEE Trans. on Industrial Electronics, vol. 45, no. 5, pp. 691-703, Oct. 1998. [11] B. K. Bose "An adaptive hysteresis-band current control technique of a voltage-fed PWM inverter for machine drive system," IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp. 402-408, Oct. 1990. [12] H. Vahedi and A. R. Sheikholeslami, "The source-side inductance based adaptive hysteresis band current control to be employed in active power filters," International Review on Modelling and Simulations, vol. 3, no. 5 , pp. 840-845, 2010. [13] S.Tasouijan, et al., "Robust linear parameter-varying output-feedback control of permanent magnet synchronous motors." Systems Science & Control Engineering, vol. 9, no.1 ,pp. 612-622, 2021. [14] E. -K. Kim, J. Kim, H. T. Nguyen, H. H. Choi, and J.-W. Jung, "Compensation of parameter uncertainty using an adaptive sliding mode control strategy for an interior permanent magnet synchronous motor drive," IEEE Access, vol. 7, pp.11913-11923, 2019. [15] H. Ahn, H. Park, C. Kim, and H. Lee, "A review of state-of-the-art techniques for PMSM parameter identification," Journal of Electrical Engineering & Technology, vol. 15, pp. 1177-1187, 2020. [16] X. Cai, Z. Zhang, J. Wang, and R. Kennel, "Optimal control solutions for PMSM drives: A comparison study with experimental assessments," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, no. 1, pp. 352-362, Mar. 2017. [17] O. E. Özçiflikçi, M. Koç, S. Bahçeci, and S. Emiroğlu, "Overview of PMSM control strategies in electric vehicles: a review," International Journal of Dynamics and Control, vol. 12, pp. 2093-2107, 2024. [18] R. Harikrishnan and A. E. George, "Direct Torque Control of PMSM using hysteresis modulation, PWM and DTC PWM based on PI Control for EV-A comparative analysis between the three strategies," in Proc. 2nd Int. Conf. on Intelligent Computing, Instrumentation and Control Technologies, pp. 566-571, Kannur, India, 5-6 Jul. 2019.‏ [19] A. Kaf, H. A. Gamal, and K. B. Lee, "Low complexity MPC-DSVPWM for current control of PMSM using neural network approach," IEEE Access, vol. 10, pp. 132596-132607, 2022.‏ [20] R. Gora, R. Biswas, R. K. Garg, and U. Nangia, "Field oriented control of permanent magnet synchronous motor (PMSM) driven electric vehicle and its performance analysis," in Proc. IEEE 4th Int. Conf. on Computing, Power and Communication Technologies, 6 pp., Kuala Lumpur, Malaysia, 24-26 Sept. 2021.‏ [21] I. Qureshi and V. Sharma, "Analysis of different control schemes of PMSM motor and also a comparison of FOPI and PI controller for sensorless MSVPWMM scheme," e-Prime-Advances in Electrical Engineering, Electronics and Energy, Article ID: 100359, Dec. 2023. [22] S. B. Ron Carter, et al. "Field-oriented control (FOC) for permanent magnet synchronous motors (PMSM) in electric vehicle," in Proc. Int. Conf. on Next Generation Electronics, 5 pp., Vellore, India, 14-16 Dec. 2023.‏ [23] Z. Shang, Simulation and Experiment for Induction Motor Control Strategies, M.Sc. Thesis, University of Windsor, 2011.‏‏ [24] D. -I. Son, J. -S. Han, J. -S. Park, H. -S. Lim, and G. -H. Lee, "Performance improvement of DTC-SVM of PMSM with compensation for the dead time effect and power switch loss based on extended Kalman filter," Electronics, vol. 12, no.4, Article ID: 966, Feb.-2 2023. [25] J. Rodriguez, et al., "Predictive current control of a voltage source inverter," IEEE Trans. on Industrial Electronics, vol. 54, no. 1, pp. 495-503, Feb. 2007. [26] E. J. Fuentes, J. Rodriguez, C. Silva, S. Diaz, and D. E. Quevedo, "Speed control of a permanent magnet synchronous motor using predictive current control," in Proc. IEEE 6th Int. Power Electronics and Motion Control Conf., pp. 390-395, Wuhan, China, 17-20 May 2009.‏ [27] J. I. Leon, S. Kouro, L. G. Franquelo, J. Rodriguez, and B. Wu, "The essential role and the continuous evolution of modulation techniques for voltage-source inverters in the past, present, and future power electronics," IEEE Trans. on Industrial Electronics, vol. 63, no. 5, pp. 2688-2701, May 2016. [28] R. Picas, J. Zaragoza, J. Pou, S. Ceballos, G. Konstantinou, and G. J. Capella, "Study and comparison of discontinuous modulation for modular multilevel converters in motor drive applications," IEEE Trans. on Industrial Electronics, vol. 66, no. 3, pp. 2376-2386, Mar. 2019.‏ [29] W. Jiang, H. Jiang, S. Liu, S. Ji, and J. Wang, "A carrier-based discontinuous PWM strategy for T-type three-level converter with reduced common mode voltage, switching loss, and neutral point voltage control," IEEE Trans. on Power Electronics, vol. 37, no. 2, pp. 1761-1771, Feb. 2022.‏ [30] S. Kwak and J. -C. Park, "Predictive control method with future zero-sequence voltage to reduce switching losses in three-phase voltage source inverters," IEEE Trans. on Power Electronics, vol. 30, no. 3, pp. 1558-1566, Mar. 2015.‏‏ [31] M. D. Y. Khan, "A review of analysis and existing simulation model of three phase permanent magnet synchronous motor drive (PMSM)," Control Systems and Optimization Letters, vol. 2, no. 3, pp. 349-356, 2024.‏ [32] T. M. Kumar, "A comparative study of DTC and FOC techniques in multiphase synchronous reluctance drives," National Journal of Electric Drives and Control Systems, vol. 1, no. 1, pp. 12-22, Jan./Mar. 2025.A.PesaraklooM.Khalaj-Amirhosseini12132025819410.66224/ijece.51487.23.2.81http://ijece.org/en/Article/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487http://ijece.org/en/Article/Download/51487[1] C. A. Balanis, Antenna theory: Analysis and Design, John Wiley & Sons, 2016. [2] R. S. Elliott, Antenna Theory and Design, IEEE Press, 2003. [3] W. L. Stutzman, and G. A. Thiele, Antenna Theory and Design, John Wiley & Sons, 2012. [4] R. C. Hansen, Phased Array Antennas. John Wiley & Sons, 2009. [5] R. J. Mailloux, Phased Array Antenna Handbook, Artech house, 2017. [6] Y. T. Lo, "Array theory," In Y. T. Lo and S. W. Lee (eds.), Antenna Handbook: Theory, Applications, and Design, pp. 713-803. Boston, MA: Springer US, 1988. [7] C. L. Dolph, "A current distribution for broadside arrays which optimizes the relationship between beam width and side-lobe level," Proceedings of the IRE, vol. 34, pp. 335-348, Jun. 1946. [8] M. Khalaj-Amirhosseini, "Synthesis of antenna arrays of maximum directivity for a specified sidelobe level," Iranian Journal of Electrical & Electronic Engineering, vol. 17, no. 3, Article ID: 2198, 2021. [9] R. L. Pritchard, "Optimum Directivity Patterns for Linear Point Arrays," J. Acoust. Soc. Am., vol. 25, pp. 879-891, Sept. 1953. [10] M. Khalaj-Amirhosseini, "Synthesis of antenna arrays of maximum directivity for a specified beamwidth." Iranian Journal of Electrical and Electronic Engineering 18, no. 3 (2022): 2198-2198. [11] T. T. Taylor, "Design of line-source antennas for narrow beamwidth and low side lobes," IRE Trans. Antennas Propagation, vol. 3, no. 1, pp. 16-28, Jan. 1955. [12] M. Khalaj-Amirhosseini, "Synthesis of linear and planar arrays with sidelobes of individually arbitrary levels," International Journal of RF and Microwave Computer‐Aided Engineering, vol. 29, no. 3 Article ID: e21637, Mar. 2019. [13] O. M. Bucci, G. Mazzarella, and G. Panariello, "Reconfigurable arrays by phase-only control," IEEE Trans. on Antennas and Propagation, vol. 39, no. 7, pp. 919-925, Jul. 1991. [14] R. Vescovo, "Reconfigurability and beam scanning with phase-only control for antenna arrays," IEEE Trans. on Antennas an Propagation, vol. 56, no. 6, pp. 1555-1565, Jun. 2008. [15] S. Baskar, A. Alphones, and P. N. Suganthan, "Genetic algorithm-based design of a reconfigurable antenna array with discrete phase shifters," Microwave and Optical Technology Letters, vol. 45, no. 6, pp. 461-465, Jun. 2005. [16] D. Gies and Y. Rahmat-Samii, "Particle swarm optimization for reconfigurable phase-differentiated array design," Microwave and Optical Technology Letters, vol. 38, no. 3, pp. 168-175, Aug. 2003. [17] B. Fuchs, "Application of convex relaxation to array synthesis problems, IEEE Trans. Antennas Propagation, vol. 62, no. 2, pp. 634-640, Feb. 2014. [18] R. Elliott, "Design of line-source antennas for sum patterns with sidelobes of individually arbitrary heights," IEEE Trans. on Antennas and Propagation, vol. 24, no. 1, pp. 76-83, Jan. 1976. [19] R. Elliott, "Design of line source antennas for difference patterns with sidelobes of individually arbitrary heights," IEEE Transactions on Antennas and Propagation 24, no. 3, PP. 310-316, May 1976. [20] T. T. Taylor, "Design of circular apertures for narrow beamwidths and low sidelobes," IEEE Trans. Antennas and Propagation, vol. 8, no. 1, pp. 17-22, Jan. 1960. [21] E. T. Bayliss, "Design of monopulse antenna difference patterns with low sidelobes," The Bell System Technical Journal, vol. 47, no. 5, pp. 623-650, May/Jun. 1968. [22] R. S. Elliott, "Design of line-source antennas for narrow beamwidth and asymmetric low sidelobes," IEEE Trans. Antennas Propagation, vol. 23, no. 1, pp. 100-107, Jan. 1975. [23] A. T. Villeneuve, "Taylor patterns for discrete arrays," IEEE Trans. Antennas and Propagation, vol. 32, no. 10, pp. 1089-1093, Oct. 1984. [24] C. A. Olen and R. T. Compton, "A numerical pattern synthesis algorithm for arrays," IEEE Trans. Antennas and Propagation, vol. 38, no. 10, pp. 1666-1676, Oct. 1990. [25] W. A. Swart and J. C. Olivier, "Numerical synthesis of arbitrary discrete arrays," IEEE Trans. Antennas and Propagation, vol. 41, no. 8, pp.1171- 1174, Aug. 1993. [26] J. Li, R. Jin, and Y. Sheng, "A fast synthesis algorithm of adaptive beams for smart antennas," Microwave and Optical Technology, vol. 36, no. 6, pp. 503-507, Mar. 2003. [27] Q. Wang and Q. -Q. He, "An arbitrary conformal array pattern synthesis method that include mutual coupling and platform effects," Progress in Electromagnetics Research, vol. 110, pp. 297-311, 2010. [28] L. Caccavale, T. Isernia, and F. Soldovieri, "Methods for optimal focusing of microstrip array antennas including mutual coupling," IEE Proc. Microwaves, Antennas and Propagation, vol. 147, no. 3, Article ID: 199202, Jun. 2000. [29] P. Rocca, N. Anselmi, and A. Massa, "Optimal synthesis of robust beamformer weights exploiting interval analysis and convex optimization," IEEE Trans. Antennas Propagtion, vol. 62, no. 7, pp. 3603 3612, Jul. 2014. [30] Y. Han and C. Wan, "Scalable alternating projection and proximal splitting for array pattern synthesis," International Journal of Antennas and Propagation, vol. 2015, Article ID: 915293, 2015. [31] S. -L. Chen, P. -Y. Qin, Y. J. Gue, Y. Liu, and P. You, "Generalized 2-D numerical pattern synthesis algorithm for low cross polarization and low sidelobe synthesis," IEEE Trans. Antennas Wireless Propagation Letters, vol. 16, pp. 2578-2581, 2017. [32] M. Khalaj-Amirhosseini, "Phase-only power pattern synthesis of linear arrays using autocorrelation matching method," IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 7, pp. 1487-1491, Jul. 2019. [33] M. Khalaj-Amirhosseini, Giuseppe Vecchi, and Paola Pirinoli. "Near-Chebyshev pattern for nonuniformly spaced arrays using zeros matching method," IEEE Trans. on Antennas and Propagation, vol. 65, no. 10, pp. 5155-5161, Oct. 2017. [34] M. Khalaj-Amirhosseini, "Design of nonuniformly spaced antenna arrays using Fourier’s coefficients equating method," IEEE Trans. on Antennas and Propagation, vol. 66, no. 10, pp. 5326-5332, Oct. 2018. [35] M. Khalaj-Amirhosseini, "Design of nonuniformly spaced arrays using zeros matching method," International Journal of RF and Microwave Computer‐Aided Engineering, vol. 28, no. 9, Article ID: e21490, 2018. [36] M. Khalaj-Amirhosseini, "Design of nonuniformly spaced antenna arrays using orthogonal coefficients equating method," Radioengineering, vol. 31, no. 4, 573-579, 2022. [37] H. Schjaer-Jacobsen and K. Madsen, "Synthesis of nonuniformly spaced arrays using a general nonlinear minimax optimization method," IEEE Trans. Antennas Propagation, vol. 24, no. 4, pp. 501-506, Jul. 1976. [38] J. -H. Bae, K. -T. Kim, J. -H. Lee, H. -T. Kim, and J. -I. Choi, "Design of Steerable Non-Uniform Linear Array Geometry for Side-Lobe Reduction," Microwave and Optical Technology Letter, vol. 36, no. 5, pp. 363-367, 2003. [39] D. G. Kurup, M. Himdi and A. Rydberg, "Synthesis of uniform amplitude unequally spaced arrays using the differential evolution algorithm," IEEE Trans. Antenna Propagtion, vol. 51, no. 9, pp. 2210- 2217, Sept. 2003. [40] H. Oraizi and M. Fallahpour, "Nonuniformly spaced linear array design for the specified beamwidth/sidelobe level or specified directivity/sidelobe level with coupling considerations," Progress in Electromagnetic Research M, vol. 4, pp. 185-209, 2008. [41] M. Asif Zaman and Md. Abdul-Matin, "Nonuniformly spaced linear antenna array design using firefly algorithm," International Journal of Microwave Science and Technology, vol. 2012, Article ID: 256759, 2012. [42] K. R. Mahmoud, "Synthesis of unequally-spaced linear array using modified central force optimization algorithm," IET Microwaves, Antennas & Propagation, vol. 10, no. 10, pp. 1011-1021, Jul. 2016. [43] R. F. Harrington, "Sidelobe reduction by nonuniform element spacing," IRE Trans. Antennas Propagation, vol. 9, pp. 187-192, Mar. 1961. [44] A. Ishimaru, "Theory of unequally spaced arrays," IEEE Trans. Antennas Propagation, vol. 11, no. 6, pp. 691-702, Nov. 1962. [45] R. W. Redlich, "Iterative least squares synthesis of nonuniformly spaced linear array," IEEE Trans. Antennas Propagation, vol. 21, no. 1, pp. 106-108, Jan. 1973. [46] F. Hodjat and S. A. Hovanessian, "Nonuniformly spaced linear and planar array antennas for sidelobe reduction," IEEE Trans. Antennas Propagation, vol. 26, no. 2, pp. 198-204, Mar. 1978. [47] C. -C. Yu, "Sidelobe reduction of asymmetric linear array by spacing perturbation," Electronics Letters, vol. 33, pp. 730-732, 24 Apr. 1997. [48] X. F. Ren, J. A. Azevedo and A. M. Casimiro, "Synthesis of nonuniformly spaced arrays using the Fourier transform and window techniques," IET Microwaves, Antennas & Propagation, vol. 3, no. 8, pp. 1245-1253, Dec. 2009. [49] C. Lin, A. Qing, and Q. Feng, "Synthesis of unequally spaced antenna arrays by using differential evolution," IEEE Trans. Antennas Propagation, vol. 58, no. 8, pp. 2553-2558, Aug. 2010. [50] K. Yang, Z. Q. Zhao, and Q. H. Liu, "Fast pencil beam pattern synthesis of large unequally spaced antenna arrays," IEEE Trans. on Antennas and Propagation, vol. 61, no. 2, pp. 627-634, Feb. 2013. [51] A. Ishimaru, "Unequally spaced arrays based on the Poisson sum formula," IEEE Trans. Antennas Propagation, vol. 62, no. 4, pp. 1549-1554, Apr. 2014. [52] B. Q. You, L. R. Cai, J. H. Zhou and H. T. Chou, "Hybrid approach for the synthesis of unequally spaced array antennas with sidelobes reduction," IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 1569-1572, 2015. [53] C. L. Dolph, "A current distribution for broadside arrays which optimizes the relationship between beam width and side-lobe level," Proceedings of the IRE, vol. 34, no. 6, pp. 335-348, Jun. 1946.