ijece-202605192320260519231850CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagNashriyyah -i Muhandisi -i Barq va Muhandisi -i Kampyutar -i Iranijece168237454122025224Mohamad YounessAnsarey MovahedM. R.Motavalli Kasmaie412202526427010.66224/ijece.44163.22.4.264http://ijece.org/en/Article/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163http://ijece.org/en/Article/Download/44163[1] B. Andžej, V. Barzdenas, and A. Vasjanov, "Linearization as a solution for power amplifier imperfections: a review of methods," Electronics, vol. 10, no. 9, Article ID: 1073, May 2021. [2] P. L. Gilabert, J. R. Pérez-Cisneros, G. Montoro, M. Lavín, and J. García, "Digital predistortion linearization of a GaN HEMT push-pull power amplifier for cable applications with high fractional bandwidth," IEEE Trans. on Broadcasting, vol. 69, no. 2, pp. 516-527, Jun. 2023. [3] W. T. Tsai, C. Y. Liou, Z. A. Peng, and S. G. Mao, "Intermodulation distortion analysis for power amplifier with various collector voltages," in Proc. IEEE Int. Symp. on Radio-Frequency Integration Technology, RFIT'18, 3 pp., Melbourne, Australia, 15-17 Aug. 2018. [4] S. Wang, P. M. Ferreira, and A. Benlarbi-Delai, "Physics informed spiking neural networks: application to digital predistortion for power amplifier linearization," IEEE Access, vol. 11, pp. 48441-48453, 2023. [5] C. B. Haskins, Diode Predistortion Linearization for Power Amplifier RFICs in Digital Radios, Master Thesis, Virginia Polytechnic Institute and State University, Apr. 2000. [6] C. S. Cripps, RF Power Amplifiers for Wireless Communications, Artech House, 2006. [7] J. Pedro and N. Carvalho, Intermodulation Distortion in Microwave and Wireless Circuits, Artech House, 2003. [8] S. Cripps, RF Power Amplifiers for Wireless Communications, Book, 2nd Edition, Artech, 2006. [9] Q. Cai, W. Che, and K. Ma, "A linear GaN power amplifier using novel transistor based analog predistortion method," in Proc. IEEE MTT-S Int. Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, IMWS-AMP'16, 4 pp., Chengdu, China, 20-22 Jul. 2016. [10] Q. Cai, W. Che, K. Ma, and M. Zhang, "A simplified transistor based analog predistorter for a GaN Power mplifier," IEEE Trans. on Circuits and Systems II: Express Briefs, vol. 65, no. 3, pp. 326–330, Mar. 2018. [11] F. G. Minenna, Y. Elskens, and F. Doveil, "The traveling-wave tube in the history of telecommunication", The European Physical Journal H, vol. 44, 36 pp., 2019. [12] J. Carvers, "Amplifier linearization using a digital predistorter with fast adaptation and low memory requirements," IEEE Trans. on Vehicular Technology, vol. 39, no. 4, pp. 473-382, Nov. 1990. [13] N. B. Carvalho and J. C. Pedro, Intermodulation Distortion in Microwave and Wireless Circuits, Artech, 2003. [14] N. Safari, P. Fedorenko, J. S. Kenney, and T. Roste, "Spline-based model for digital predistortion of wide-band signals for high power amplifier linearization," in Proc. IEEE/MTT-S Int. Microwave Symp., pp. 1441-1444, Honolulu, HI, USA, 03-08 Jun. 2007. [15] M. Xiao, Novel Predistortion Techniques for RF Power Amplifiers, Ph.D. Dissertation Thesis University of Birmingham, Oct. 2009. [16] P. Kenington, High Linearity RF Amplifier Design, Book, Artech House, 2000. [17] S. Bhardwaj, S. Moallemi, and J. Kitchen, "A review of hybrid supply modulators in CMOS technologies for envelope tracking PAs," IEEE Trans. on Power Electronics, vol. 38, no. 5, pp. 6036-6062, May 2023. [18] J. A. G. Aguilar, C. V. Rosales, and E. T. Cuautle, "Automated driving of GaN chireix power amplifier for the digital predistortion linearization," IEEE Trans. on Circuits and Systems II: Express Briefs, vol. 68, no. 6, pp. 1887-1891, Jun. 2021.ابراهیمابراهیم زادهAmirFathiBehboudMashoufi412202527728110.66224/ijece.47037.22.4.277http://ijece.org/en/Article/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037http://ijece.org/en/Article/Download/47037[1] A. Kumar, "VLSI implementation of vedic multiplier," Design and Development of Efficient Energy Systems, Ch. 2, pp. 13-30, Scrivener Publishing LLC, 2022. [2] M. A. Ahmed, M. A. M. El-Bendary, F. Z. Amer, and S. M. Singy, "Delay optimization of 4-bit ALU designed in FS-GDI technique," in Proc. Int. Conf. on Innovative Trends in Computer Engineering, ITCE'19, pp. 534-537, Aswan, Egypt, 2-4 Feb. 2019. [3] A. Morgenshtein, V. Yuzhaninov, A. Kovshilovsky, and A. Fish, "Full-swing gate diffusion input logic-case-study of low-power CLA adder design," Integration, vol. 47, no. 1, pp. 62-70, Jan. 2014. [4] C. H. Chang, J. Gu, and M. Zhang, "Ultra-low-voltage low-power CMOS 4-2 and 5-2 compressors for fast arithmetic circuits," IEEE Trans. on Circuits and Systems I: Regular Papers, vol. 51, no. 10, pp. 1985-1997, Oct. 2004. [5] S. Veeramachaneni, K. M. Krishna, L. Avinash, S. R. Puppala, and M. B. Srinivas, "Novel architectures for high-speed and low-power 3-2, 4-2 and 5-2 compressors," in Proc. 20th Int. Conf. on VLSI Design Held Jointly with 6th Int. Conf. on Embedded Systems, VLSID'07, pp. 324-329, Bangalore, India, 6-10 Jan. 2007. [6] A. Najafi, A. Najafi, and S. Mirzakuchaki, "Low-power and high-performance 5:2 compressors," in Proc. 22nd Iranian Conf. on Electrical Engineering, ICEE'14, pp. 33-37, Tehran, Iran, 20-22 May 2014. [7] A. Fathi, B. Mashoufi, and S. Azizian, "Very fast, high-performance 5-2 and 7-2 compressors in CMOS process for rapid parallel accumulations," IEEE Trans. on Very Large Scale Integration (VLSI) Systems, vol. 28, no. 6, pp. 1403-1412, Jun. 2020. [8] R. Uma and P. Dhavachelvan, "Modified gate diffusion input technique: a new technique for enhancing performance in full adder circuits," Procedia Technology, vol. 6, pp. 74-81, 2012. [9] E. Abiri, A. Darabi, and S. Salem, "Design of multiple-valued logic gates using gate-diffusion input for image processing applications," Computers & Electrical Engineering, vol. 69, pp. 142-157, 2018.AhmadEntezariArashDehestani KolagarMohammad Reza Alizadeh Pahlavani412202522524010.66224/ijece.47224.22.4.225http://ijece.org/en/Article/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224http://ijece.org/en/Article/Download/47224[1] H. X. Wu, S. K. Cheng, and S. M. Cui, "A controller of brushless DC motor for electric vehicle" IEEE Trans. on Magnetics, vol. 41, no. 1, pp. 509-512, Jan. 2005. [2] M. Pandi Maharajan and S. Arockia Edwin Xavier, "Design of speed control and reduction of torque ripple factor in BLDC motor using spider based controller," IEEE Trans. on Power Electronics, vol. 34, no. 8, pp. 7826-7837, Nov. 2018. [3] M. Štulrajter, P. Makyšsn, and P. Rafajdus, "Sensorless control of high speed BLDC," in Proc. IEEE Int. Symp. on Sensorless Control for Electrical Drives, pp. 225-230, Catania, Italy, 18-19 Sept. 2017. [4] R. M. Pindoriya, S. Rajendran, and P. J. Chauhan, "Speed control of BLDC motor using PWM technique," International J. of Advance Engineering and Research Development, vol. 6, no. 4, pp. 18-21, Mar. 2014. [5] M. Mahmud, S. M. A. Motakabber, A. H. M. Zahirul Alam, and A. Nurashikin Nordin, "Control BLDC motor speed using PID controller," International J. of Advanced Computer Science and Applications, vol. 11, no. 3, pp. 477-481, 2020. [6] D. Mohanraj, R. Aruldavid, R. Verma, K. Sathyasekar, A. Bakr Barnawi, B. Chokkalingam, and L. Mihet-popa, "A review of BLDC motor: state of art, advanced control techniques, and applications," IEEE Access, vol. 10, pp. 54833-54869, 2022. [7] P. Yadav, R. Poola, and K. Najumudeen, "High dynamic performance of a BLDC motor with a front end converter using an FPGA based controller for electric vehicle application," Turkish J. of Electrical Engineering and Computer Sciences, vol. 24, no. 3, pp. 1636-1651, Jun. 2016. [8] E. Anitha and P. Vairaprakash, "Design of dynamic states and digital speed control of BLDC motor," in Proc. Int. Conf. on Circuit, Power and Computing Technologies, 6 pp., Nagercoil, India, 18-19 Mar. 2016. [9] J. Shi, Q. Mi, W. Cao, and L. Zhou1, "Optimizing BLDC motor drive performance using particle swarm algorithm? tuned fuzzy logic controller," SN Applied Sciences, vol. 4, Article ID: 293, Oct. 2022. [10] M. A. A. Hassan, A. R. Abdullah, and N. Bahari, "Speed control analysis of brushless DC motor based on maximum amplitude DC current feedback," in Proc. ICPER, 4th Int. Conf. on Production, Energy and Reliability, MATEC Web of Conferences, vol. 13, 6 pp., 2014. [11] I. Faraji Davoudkhani and M. Akbari, "Adaptive speed control of brushless DC (BLDC) motor based on interval type-2 fuzzy logic," in Proc. 24th Iranian Conf. on Electrical Engineering, ICEE'16, pp. 1119-1124, Shiraz, Iran, 10-12 May 2016. [12] J. Bernat and S. Stepien, "The adaptive speed controller for the BLDC motor using MRAC technique," IFAC Proceedings Volumes, vol. 44, no. 1, pp. 4143-4148, Jun. 2011. [13] J. Carlos Gamazo-Real, E. Vázquez-Sánchez, and J. Gómez-Gil, "Position and speed control of brushless DC motors using sensorless techniques and application trends," Sensors, vol. 10, no. 7, pp. 6901-6947, Jul. 2010.SMMomeniHadiShahriarShahhoseini412202525726310.66224/ijece.47264.22.4.257http://ijece.org/en/Article/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264http://ijece.org/en/Article/Download/47264 [1] W. Amin, et al. "HyDra: hybrid task mapping application framework for NOC-based MPSoCs," IEEE Access, vol. 11, pp. 52309-52326, 2023. [2] A. Kumar, N. Kumar, and B. Reddy, "An efficient real-time embedded application mapping for NoC based multiprocessor system on chip," Wireless Personal Communications, vol. 128, no. 4, pp. 2937-2952, 2023. [3] S. P. Kaur, M. Ghose, A. Pathak, and R. Patole, "A survey on mapping and scheduling techniques for 3D network-on-chip," J. of Systems Architecture, vol. 147, Article ID: 103064, Feb. 2024. [4] L. Mo, X. Li, A. Kritikakou, and X. Zhai, "Contention and reliability-aware energy efficiency task mapping on NoC-based MPSoCs," IEEE Trans. on Reliability, vol. 74, no. 1, pp. 2010-2026, Mar. 2025. [5] M. Momeni and H. S. Shahhoseini, "Energy efficient 3D network-on-chip based on approximate communication," Computer Networks, vol. 203, Article ID: 108652, 11 Feb. 2022. [6] D. Deb and J. Jose, "ZPP: a dynamic technique to eliminate cache pollution in NoC based MPSoCs," ACM Trans. on Embedded Computing Systems, vol. 22, Article ID.: 118, 25 pp., 2023. [7] M. Mineo, M. Palesi, G. Ascia, P. P. Pande, and V. Catania, "On-chip communication energy reduction through reliability aware adaptive voltage swing scaling," IEEE Trans. Comput. Des. Integr. Circuits Syst., vol. 35, no. 11, pp. 1769-1782, Nov. 2016. [8] Y. Ouyang, et al., "DBU-PG: energy-efficient noc design using dual-buffering power gating," the J. of Supercomputing, vol. 80, pp. 13632-13656, 2024. [9] M. Baharloo, R Aligholipour, M. Abdollahi, and A. Khonsari, "ChangeSUB: a power efficient multiple network-on-chip architecture," Computer Electronic Engineering, vol. 83, Article ID: 106578, May 2020. [10] F. Yazdanpanah and R. A. Afsharmazayejani, "Systematic analysis of power saving techniques for wireless network-on-chip architectures," J. of Systems Architecture, vol. 126, Article ID: 102485, May 2022. [11] G. Ascia, V. Catania, S. Monteleone, M. Palesi, D. Patti, J. Jose, and V. M. Salerno, "Exploiting data resilience in wireless network-on-chip architectures," ACM J. Emerging Technology Computer System, vol. 16, no. 2, Article ID:21, 27 pp., 2020. [12] R. Hesse and N. E. Jerger, "Improving DVFS in NoCs with coherence prediction," in Proc. of the 9th International Symposium on Networks-on-Chip, Article ID:24, 8 pp., Vancouver, Canada, 28-30 Sept. 2015. [13] T. Krishna, J. Postman, C. Edmonds, L. S. Peh, and P. Chiang, "SWIFT: a swing-reduced interconnect for a token-based network-on-chip in 90 nm CMOS," in Proc. of IEEE Int. Conf. on Computer Design: VLSI in Computers and Processors, pp. 439-446, Amsterdam, Netherlands, 3-6 Oct. 2010. [14] R. Hesse, J. Nicholls, and N. E. Jerger, "Fine-grained bandwidth adaptivity in networks-on-chip using bidirectional channels," in Proc. of IEEE/ACM 6th In. Symp. on Networks-on-Chip, pp. 132-141, Lyngby, Denmark ,9-11 May 2012. [15] N. Hardavellas, M. Ferdman, B. Falsafi, and A. Ailamaki, "Reactive NUCA: near-optimal block placement and replication in distributed caches," in Proc. of the 36th Annual Int. Symp. on Computer Architecture, pp. 184-195, Jun. 2009. [16] G. Chen, F. Li, S. W. Son, and M. Kandemir, "Application mapping for chip multiprocessors," in Proc. of the 45th Annual Design Automation Conf., pp. 620-625, Austin, TX, USA, 20-24 Jun. 2008. [17] M. E. Wolf and M. S. Lam, "A data locality optimizing algorithm," ACM SIGPLAN Notices, vol. 26, no. 6, pp. 30-44, May 1991. [18] U. Bondhugula, et al., "Towards effective automatic parallelization for multicore systems," in Proc. IEEE Int. Symp. on Parallel and Distributed Processing, 5 pp., Miami, FL, USA, 14-18 Apr. 2008. [19] F. Rad, M. Reshadi, and A. Khademzadeh, "Flow control and scheduling mechanism to improve network performance in wireless NoC," IET Communications, vol. 14, no. 14, pp. 2231-2239, Aug. 2020. [20] A. Das, A. Kumar, J. Jose, and M. Palesi, "Opportunistic caching in NoC: exploring ways to reduce miss penalty," IEEE Trans. on Computer, vol. 70, no. 6, pp. 892-905, Jun. 2021. [21] P. G. Massas and F. Pétrot, "Comparison of memory write policies for NoC based multicore cache coherent systems," in Proc. of the Conf. on Design, Automation and Test in Europe, pp. 997-1002, Mar. 2008. [22] N. Agarwal, T. Krishna, L. S. Peh, and N. Jha, "GARNET: a detailed on-chip network model inside a full-system simulator," in Proc. of the International Symposium on Performance Analysis of Systems and Software, pp. 33-42, Munich, Germany, 10-14 Mar. 2009. [23] N. Binkert, et al., "The Gem5 simulator," ACM SIGARCH Computer Architecture News, vol. 39, no. 2, pp. 1-7, Aug. 2011. [24] C. Bienia, S. Kumar, J. P. Singh, and K. Li, "The PARSEC benchmark suite: characterization and architectural implications," in Proc. of the 17th. Parallel Architectures and Compilation Techniques, pp. 72-81, Toronto, Canada, 25-29 Oct. 2008. [25] J. San Miguel, M. Badr, and N. E. Jerger, "Load value approximation," in Proc. of the 47th Annual IEEE/ACM Int. Symp. on Microarchitecture, pp. 127-139, Cambridge, UK, 13-17 Dec. 2014.PeymanMirzaeipourSyed Qudrat AllahseifosadatMohsenSanieiS. S.Mortazavi412202524125610.66224/ijece.47556.22.4.241http://ijece.org/en/Article/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556http://ijece.org/en/Article/Download/47556[1] Y. Luo and C. Liu, "Elimination of harmonic currents using a reference voltage vector based-model predictive control for a six-phase PMSM motor," IEEE Trans. on Power Electronics, vol. 34, no. 7, pp. 6960-6972, Jul. 2019. [2] P. F. C. Gonçalves, S. M. A. Cruz, and A. M. S. Mendes, "Disturbance observer based predictive current control of six-phase permanent magnet synchronous machines for the mitigation of steady-state errors and current harmonics," IEEE Trans. on Industrial Electronics, vol. 69, no. 1, pp. 130-140, Jan. 2022. [3] P. Gonçalves, S. Cruz, and A. Mendes, "Fault-tolerant predictive current control of six-phase PMSMs with a single isolated neutral configuration," Machines, vol. 10, no. 12, Article ID: 1152, 2022. [4] J. Zhang and F. Yu, "A novel model predictive current control for asymmetrical six-phase PMSM drives with an optimum duty-cycle calculation scheme," IEEE Access, vol. 11, pp. 8096-8107, 2023. [5] S. He, Y. Li, Z. Shuai, Y. Zhang, J. Gai, and G. Zhou, "Virtual-vector-based FCS model predictive current control with duty cycle optimization for dual three-phase motors," Journal of Physics: Conference Series, vol. 1754, Article ID: 012083, 2021. [6] B. Lei, L. Wu, Z. Lin, and P. Mei, "Harmonic current suppression of dual three-phase PMSM based on model predictive direct torque control," Mathematical Problems in Engineering, vol. 2021, no. 1, Article ID: 3043673, 2021. [7] Y. Luo and C. Liu, "Multi-vector-based model predictive torque control for a six-phase PMSM motor with fixed switching frequency," IEEE Trans. on Energy Conversion, vol. 34, no. 3, pp. 1369-1379, Sept. 2019. [8] P. Gonçalves, S. Cruz, and A. Mendes, "Finite control set model predictive control of six-phase asymmetrical machines an overview," Energies, vol. 12, no. 4, pp. 4693-4703, Aug. 2019. [9] H. Wang, J. Hu, Y. Li, and Z. Wang, "Dynamic modeling for interturn short circuit faults in symmetrical six-phase FSCW-PMSMs with unaligned fault coil," IEEE Trans. on Power Electronics, vol. 39, no. 2, pp. 2721-2730, Feb. 2024. [10] P. P. Das, S. Satpathy, and S. Bhattacharya, "A voltage injection-based current harmonics suppression strategy for six-phase PMSM with nonsinusoidal back EMF," IEEE J. of Emerging and Selected Topics in Industrial Electronics, vol. 5, no. 1, pp. 285-297, Jan. 2024. [11] O. Gonzalez, et al., "Model predictive current control of six-phase induction motor drives using virtual vectors and space vector modulation," IEEE Trans. on Power Electronics, vol. 37, no. 7, pp. 7617-7628, Mar. 2022. [12] H. W. Kim, M. J. Youn, K. Y. Cho, and H. S. Kim, "Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty," IEEE Trans. on Control Systems Technology, vol. 14, no. 4, pp. 589-601, Jul. 2006. [13] K. Zhang, M. Fan, Y. Yang, R. Chen, Z. Zhu, C. Garcia, and J. Rodriguez, "Tolerant sequential model predictive direct torque control of permanent magnet synchronous machine drives," IEEE Trans. on Transportation Electrification, vol. 6, no. 3, pp. 1167-1176, Sept. 2020. [14] Y. Luo and C. Liu, "A flux constrained predictive control for a six-phase PMSM motor with lower complexity," IEEE Trans. on Industrial Electronics, vol. 66, no. 7, pp. 5081-5093, Jul. 2019. [15] Y. Luo and C. Liu, "Model predictive control for a six-phase PMSM motor with a reduced-dimension cost function," IEEE Trans. on Industrial Electronics, vol. 67, no. 2, pp. 969-979, Feb. 2020. [16] Y. Wu, Z. Zhang, Q. Yang, W. Tian, P. Karamanakos, M. Lobo Heldwein, and R. Kennel, "A direct model predictive control strategy with an implicit modulator for six-phase PMSMs," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 11, no. 2, pp. 1291-1304, Apr. 2023. [17] J. Xu, M. Odavic, Z. Q. Zhu, Z. Y. Wu, and N. M. A. Freire, "Modulation restraint analysis of space vector PWM for dual three-phase machines under vector space decomposition," IEEE Trans. on Power Electronics, vol. 36, no. 12, pp. 14491-14507, Dec. 2021. [18] W. Liao, M. Lyu, S. Huang, Y. Wen, M. Li, and S. Huang, "An enhanced SVPWM strategy based on vector space decomposition for dual three-phase machines fed by two DC-source VSIs," IEEE Trans. on Power Electronics, vol. 36, no. 8, pp. 9312-9321, Aug. 2021. [19] R. T. Arumalla, S. Figarado, K. Panuganti, and N. Harischandrappa, "Selective lower order harmonic elimination in DC-AC converter using space vector approach," IEEE Trans. on Circuits and Systems II: Express Briefs, vol. 68, no. 8, pp. 2890-2894, Aug. 2021. [20] Z. Wang, Y. Wang, J. Chen, and Y. Hu, "Decoupled vector space decomposition based space vector modulation for dual three-phase three-level motor drives," IEEE Trans. on Power Electronics, vol. 33, no. 12, pp. 10683-10697, Dec. 2018. [21] D. Woldegiorgis and H. A. Mantooth, "A modified neutral-point voltage control strategy for three-level inverters based on decomposition of space vector diagram," CES Trans. on Electrical Machines and Systems, vol. 6, no. 2, pp. 124-134, Jun. 2022. [22] J. Xu, M. Odavic, Z. Q. Zhu, Z. Y. Wu, and N. Freire, "A novel space vector PWM technique with duty cycle optimization through zero vectors for dual three-phase PMSM," IEEE Trans. on Energy Conversion, vol. 37, no. 4, pp. 2271-2284, Dec. 2022. [23] W. Li, P. Song, Q. Li, Z. Li, and N. C. Kar, "Open-phase fault modeling for dual three-phase PMSM using vector space decomposition and negative sequence components," IEEE Trans. on Magnetics, vol. 58, no. 8, pp. 1-6, Aug. 2022. [24] D. Zhou, K. Luo, Z. Shen, and J. Zou, "Vector-space-decomposition-based power flow control of single-stage-multiport-inverter-fed PMSM drive for hybrid electric vehicles," IEEE Trans. on Industrial Electronics, vol. 71, no. 8, pp. 8514-8524, Aug. 2024. [25] R. Fu, "A simple and robust model predictive current control of PMSM using stator current predictor and target-oriented cost function," IEEE Access, vol. 10, pp. 100024-100032, 2022. [26] J. Gao, C. Gong, W. Li, and J. Liu, "Novel compensation strategy for calculation delay of finite control set model predictive current control in PMSM," IEEE Trans. on Industrial Electronics, vol. 67, no. 7, pp. 5816-5819, Jul. 2020. [27] C. A. Agustin, J. T. Yu, Y. S. Cheng, C. K. Lin, and Y. W. Yi, "A synchronized current difference updating technique for model-free predictive current control of PMSM drives," IEEE Access, vol. 9, pp. 63306-63318, 2021. [28] X. Li, W. Tian, X. Gao, Q. Yang, and R. Kennel, "A generalized observer-based robust predictive current control strategy for PMSM drive system," IEEE Trans. on Industrial Electronics, vol. 69, no. 2, pp. 1322-1332, Feb. 2022. [29] T. Li, R. Ma, and W. Han, "Virtual-vector-based model predictive current control of five-phase PMSM with stator current and concentrated disturbance observer," IEEE Access, vol. 8, pp. 212635-212646, 2020. [30] X. Li, Y. Wang, X. Guo, X. Cui, S. Zhang, and Y. Li, "An improved model-free current predictive control method for SPMSM drives," IEEE Access, vol. 9, pp. 134672-134681, 2021.H. R.PairoFarzadBodaghi412202527127610.66224/ijece.48343.22.4.271http://ijece.org/en/Article/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343http://ijece.org/en/Article/Download/48343[1] K. B. Tawfiq, M. N. Ibrahim, E. E. El-Kholy, and P. Sergeant, "Performance analysis of a rewound multiphase synchronous reluctance machine," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 10, no. 1, pp. 297-309, Feb. 2022. [2] Y. Bao, et al., "A novel concept of ribless synchronous reluctance motor for enhanced torque capability," IEEE Trans. on Industrial Electronics, vol. 67, no. 4, pp. 2553-2563, Apr. 2020. [3] Q. Chen, Y. Yan, G. Xu, M. Xu, and G. Liu, "Principle of torque ripple reduction in synchronous reluctance motors with shifted asymmetrical poles," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 8, no. 3, pp. 2611-2622, Sep. 2020. [4] W. Chen, S. Dong, X. Li, Y. Cao, and G. Zhang, "Initial rotor position detection for brushless DC motors based on coupling injection of high-frequency signal," IEEE Access, vol. 7, pp. 133433-133441, 2019. [5] G. Bi, G. Wang, G. Zhang, N. Zhao, and D. Xu, "Low-noise initial position detection method for sensorless permanent magnet synchronous motor drives," IEEE Trans. on Power Electronics, vol. 35, no. 12, pp. 13333-13344, Dec. 2020. [6] D. Pasqualotto, S. Rigon, and M. Zigliotto, "Sensorless speed control of synchronous reluctance motor drives based on extended Kalman filter and neural magnetic model," IEEE Trans. on Industrial Electronics, vol. 70, no. 2, pp. 1321-1330, Feb. 2023. [7] X. Huang, J. Liang, Z. Qian, and J. Li, "An iterative estimation algorithm of prepositioning focusing on the detent force in the permanent magnet linear synchronous motor system," IEEE Trans. on Industrial Electronics, vol. 67, no. 10, pp. 8252-8261, Oct. 2020. [8] T. Wu, et al., "A fast estimation of initial rotor position for low-speed free-running IPMSM," IEEE Trans. on Power Electronics, vol. 35, no. 7, pp. 7664-7673, Jul. 2020. [9] Z. Wang, Z. Cao, and Z. He, "Improved fast method of initial rotor position estimation for interior permanent magnet synchronous motor by symmetric pulse voltage injection," IEEE Access, vol. 8, pp. 59998-60007, 2020. [10] D. Kim, J. Kim, H. Lim, J. Park, J. Han, and G. Lee, "A study on accurate initial rotor position offset detection for a permanent magnet synchronous motor under a no-load condition," IEEE Access, vol. 9, pp. 73662-73670, 2021. [11] X. Zhang, H. Li, S. Yang, and M. Ma, "Improved initial rotor position estimation for PMSM drives based on HF pulsating voltage signal injection," IEEE Trans. on Industrial Electronics, vol. 65, no. 6, pp. 4702-4713, Jun. 2018. [12] X. Fu, Y. Xu, H. He, and X. Fu, "Initial rotor position estimation by detecting vibration of permanent magnet synchronous machine," IEEE Trans. on Industrial Electronics, vol. 68, no. 8, pp. 6595-6606, Aug. 2021. [13] J. Wei, H. Xu, B. Zhou, Z. Zhang, and C. Gerada, "An integrated method for three-phase AC excitation and high-frequency voltage signal injection for sensorless starting of aircraft starter/generator," IEEE Trans. on Industrial Electronics, vol. 66, no. 7, pp. 5611-5622, Jul. 2019. [14] H. Li, X. Zhang, S. Yang, F. Li, and M. Ma, "Improved initial rotor position estimation of IPMSM using amplitude demodulation method based on HF carrier signal injection," in Proc. 43rd Annual Conf. of the IEEE Industrial Electronics Society, IECON'017, pp. 1996-2001, Beijing, China, 29 Oct-1 Nov. 2017. [15] T. Wu, et al., "A fast estimation of initial rotor position for low-speed free-running IPMSM," IEEE Trans. on Power Electronics, vol. 35, no. 7, pp. 7664-7673, Jul. 2020. [16] S. C. Yang, S. M. Yang, and J. H. Hu, "Robust initial position estimation of permanent magnet machine with low saliency ratio," IEEE Access, vol. 5, pp. 2685-2695, 2017. [17] X. Wu, et al., "Initial rotor position detection for sensorless interior PMSM with square-wave voltage injection," IEEE Trans. on Magnetics, vol. 53, no. 11, pp. 1-4, Nov. 2017. [18] H. Pairo and B. Nikmaram, "Initial rotor position estimation of SynRM based on pulsating voltage injection combined with finite position set algorithm," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 11, no. 4, pp. 4321-4331, Aug. 2023. [19] H. Pairo, B. Nikmaram, and S. Mohamadian, "Adaptive-based accurate rotor initial position estimation in synchronous reluctance motors," IEEE Trans. on Industrial Electronics, vol. 71, no. 11, pp. 13812-13821, Nov. 2024. [20] B. Xia, et al., "An improved high-frequency voltage signal injection-based sensorless control of IPMSM drives with current observer," IEEE Trans. on Transportation Electrification, vol. 10, no. 3, pp. 5155-5167, Sept. 2024. [21] X. Wu, Z. Q. Zhu, and Z. Wu, "A novel rotor initial position detection method utilizing DC-link voltage sensor," IEEE Trans. on Industry Applications, vol. 56, no. 6, pp. 6486-6495, Nov./Dec. 2020. [22] Y. Wang, et al., "Initial rotor position and magnetic polarity identification of PM synchronous machine based on nonlinear machine model and finite element analysis," IEEE Trans. on Magnetics, vol. 46, no. 6, pp. 2016-2019, Jun. 2010.