ijece-202605192220260519223107CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagNashriyyah -i Muhandisi -i Barq va Muhandisi -i Kampyutar -i Iranijece16823745282022194RoholahVahdaniHosseinKhaleghiMohsenFallah Joshaghani28202226227010.66224/ijece.28654.19.4.262http://ijece.org/en/Article/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654http://ijece.org/en/Article/Download/28654[1] M. I. Skolnik, Introduction to Radar Systems, 3rd Ed. New York: Mc-Graw-Hill, 2001. [2] J. Li and P. Stoica, MIMO Radar Signal Processing, Wiley-IEEE Press, 2008. [3] N. Levanon and E. Mozeson, Radar Signals, Wiley-IEEE Press, 2004. [4] E. Fishler, et al., "MIMO radar: an idea whose time has come," in Proc. IEEE Radar Conf., vol. 2, pp. 71-78, Philadelphia, PA, USA, 29-29 Apr. 2004. [5] K. Luo, MIMO Radar: Target Localisation, Ph.D Thesis of Imperial College London, Mar. 2013. [6] Z. Cheng, Z. He, B. Liao, and M. Fang, "MIMO radar waveform design with PAPR and similarity constraints," IEEE Trans. on Signal Processing, vol. 66, no. 4, pp. 968-981, Feb. 2018. [7] W. Fan, J. Liang, and J. Li, "Constant modulus MIMO radar waveform design with minimum peak sidelobe transmit beampattern," IEEE Trans. on Signal Processing, vol. 66, no. 16, pp. 4207-4222, Aug. 2018. [8] S. Imani, M. M. Nayebi, and S. A. Ghorashi, "Colocated MIMO radar SINR maximization under ISL and PSL constraints," IEEE Signal Processing Letters, vol. 25, no. 3, pp. 422-426, Mar. 2018. [9] Y. Du, X. Zhao, S. Wang, H. Liu, and Z. Zhang, "MIMO radar waveform optimization in clutter under general power constraints," IEEE Access, vol. 8, pp. 106121-106135, Jun. 2020. [10] J. Li and P. Stoica, "MIMO radar with colocated antennas," IEEE Signal Process. Mag., vol. 24, no. 5, pp. 106-114, Sept. 2007. [11] A. Haimovich, R. Blum, and L. Cimini, "MIMO radar with widely separated antennas," IEEE Signal Process. Mag., vol. 25, no. 1, pp. 116-129, 2008. [12] G. San Antonio, D. R. Fuhrmann, and F. C. Robey, "MIMO radar ambiguity functions," IEEE J. of Selected Topics in Signal Processing, vol. 1, no. 1, pp. 167-177, Jul. 2007. [13] A. De Maio and M. Lops, "Design principles of mimo radar detectors," IEEE Trans. Aerospace and Electronic Systems, vol. 43, no. 3, pp. 886-898, Jul. 2007. [14] C. Y. Chen and P. P. Vaidyanathan, "MIMO radar ambiguity properties using and optimization using frequency-hopping waveforms," IEEE Trans. Signal Processing, vol. 56, no. 12, pp. 5926-5936, Dec. 2008. [15] K. Deb, Multi-Objective Optimization Using Evolutionary Algorithms, Springer, 2001. [16] K. Miettinen, Nonlinear Multiobjective Optimization, Springer, 1998. [17] R. Timothyand and J. S. Arora, "The weighted sum method for multi objective optimization: new insights," Structural and Multidisciplinary Optimization, vol. 41, no. 6, pp. 853-862, Dec. 2009. [18] M. Mitchell, An Introduction to Genetic Algorithms, MIT Press, 1996. [19] R. Larson and B. H. Edwards, Multivariable Calculus, Cenage Learning, 2014. [20] W. Khan, I. M. Qureshi, and K. Soltan, "Ambiguity function of phased mimo radar with colocated antennas and its properties," IEEE Geoscience and Remote Sensing Letters, vol. 11, no. 7, pp. 1220-1224, Jul. 2014. [21] L. de Haan and A. Ferreira, Extreme Value Theory: An Introduction, Springer, 2006. [22] A. Hassanien and S. A. Vorobyov, "Phased-MIMO radar: a tradeoff between phased-array and mimo radars," IEEE Trans. Signal Processing, vol. 58, no. 6, pp. 3137-3151, Jun. 2010. [23] M. Radmard, M. Nazari Majd, M. M. Chitgarha, S. M. Karbasi, and M. M. Nayebi, "MIMO ambiguity function optimization through waveform design," in Proc. 16th In. Radar Symp., IRS’15, pp. 333-338, , Dresden, Germany, 24-26 Jun. 2015. [24] Y. Li, S. A. Vorobyov, and V. Koivunen, "Generalized ambiguity function for the mimo radar with correlated waveforms," in Proc. IEEE International Conf. on Acoustics, Speech and Signal Processing, ICASSP’14, pp. 5302-5306, Florence, Italy, 4-9 May 2014.مجيد پرويزيانخسروخاندانيوحيدجوهري مجد28202228729310.66224/ijece.28999.19.4.287http://ijece.org/en/Article/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999http://ijece.org/en/Article/Download/28999[1] M. Hu, Y. Li, S. Li, C. Fu, D. Qin, and Z. Li, "Lithium-ion battery modeling and parameter identification based on fractional theory," Energy, vol. 165, pt. B, pp. 153-163, Dec. 2018. [2] X. Wang, T. Thu Giang Hoang, Z. Pan, and Y. Q. Chen, "Fractional-order modelling and control for two parallel PWM rectifiers," IFAC-PapersOnLine, vol. 51, no. 4, pp. 54-59, Feb. 2018. [3] T. Wei and Y. S. Li, "Identifying a diffusion coefficient in a time-fractional diffusion equation," Mathematics and Computers in Simulation, vol. 151, pp. 77-95, Sept. 2018. [4] M. Bonforte, Y. Sire, and J. L. Vazquez, "Optimal existence and uniqueness theory for the fractional heat equation," Nonlinear Analysis: Theory, Methods & Applications, vol. 153, pp. 142-168, Apr. 2017. [5] J. D. Gabano, T. Poinot, and H. Kanoun, "Identification of a thermal system using continuous linear parameter-varying fractional modelling," IET Control Theory & Applications, vol. 5, no. 7, pp. 889-899, May 2011. [6] F. C. Meral, T. J. Royston, and R. Magin, "Fractional calculus in viscoelasticity: an experimental study," Communications in Nonlinear Science and Numerical Simulation, vol. 15, no. 4, pp. 939-945, Apr. 2010. [7] C. Zopf, S. E. Hoque, and M. Kaliske, "Comparison of approaches to model viscoelasticity based on fractional time derivatives," Computational Materials Science, vol. 98, pp. 287-296, Feb. 2015. [8] Y. Long, B. Xu, D. Chen, and W. Ye, "Dynamic characteristics for a hydro-turbine governing system with viscoelastic materials described by fractional calculus," Applied Mathematical Modelling, vol. 58, pp. 128-139, Jun. 2018. [9] C. Ionescu, A. Lopes, D. Copot, J. A. T. Machado, and J. H. T. Bates, "The role of fractional calculus in modeling biological phenomena: a review," Communications in Nonlinear Science and Numerical Simulation, vol. 51, pp. 141-159, Oct. 2017. [10] Y. Li, Y. Q. Chen, and I. Podlubny, "Mittag-Leffler stability of fractional order nonlinear dynamic systems," Automatica, vol. 45, no. 8, pp. 1965-1969, Aug. 2009. [11] I. Kheirizad, A. A. Jalali, and K. Khandani, "Stabilisation of unstable FOPDT processes with a single zero by fractional-order controllers," International J. of Systems Science, vol. 44, no. 8, pp. 1533-1545, Aug. 2013. [12] Y. Farid, V. J. Majd, and A. Ehsani-Seresht, "Fractional-order active fault-tolerant force-position controller design for the legged robots using saturated actuator with unknown bias and gain degradation," Mechanical Systems and Signal Processing, vol. 104, pp. 465-486, May 2018. [13] S. P. Nangrani and S. S. Bhat, "Fractional order controller for controlling power system dynamic behavior," Asian J. of Control, vol. 20, no. 1, pp. 403-414, Jan. 2018. [14] M. Netto and L. Nili, "A robust data-driven koopman kalman filter for power systems dynamic state estimation," IEEE Trans. on Power Systems, vol. 33, no. 6, pp. 7228-7237, Jun. 2018. [15] J. Zhao, "Dynamic state estimation with model uncertainties using H∞ extended kalman filter," IEEE Trans. on Power Systems, vol. 33, no. 1, pp. 1099-1100, Mar. 2018. [16] H. Bao and J. H. Oh, "Novel state estimation framework for humanoid robot," Robotics and Autonomous Systems, vol. 98, pp. 258-275, Dec. 2017. [17] N. Ramdani, L. Trave-Massuyes, and C. Jauberthie, "Mode discernibility and bounded-error state estimation for nonlinear hybrid systems," Automatica, vol. 91, pp. 118-125, May 2018. [18] M. Bettayeb and S. Djennoune, "A note on the controllabity and the observability of fractional dynamical systems," in IFAC Proc. Volumes, vol. 139, no. 11, pp. 493-498, Jan, 2006. [19] S. Dadras and H. R. Momeni, "Fractional sliding mode observer design for a class of uncertain fractional order nonlinear systems," in Proc. of the 50th IEEE Conf. on Decision and Control and European Control Conf., CDC-ECC’11, pp. 6925-6930, Orlando, FL, USA, 12-15 Dec. 2011. [20] Z. Belkhatir and T. M. Laleg-Kirati, "High-order sliding mode observer for fractional commensurate linear systems with unknown input," Automatica, vol. 82, pp. 209-217, Aug. 2017. [21] N. Djeghali, S. Djennoune, M. Bettayeb, M. Ghanes, and J. P. Barbot, "Observation and sliding mode observer for nonlinear fractional-order system with unknown input," ISA Trans., vol. 63, pp. 1-10, Jul. 2016. [22] Y. H. Lan and Y. Zhou, "Non-fragile observer-based robust control for a class of fractional-order nonlinear systems," Systems & Control Letters, vol. 62, pp. 1143-1150, Dec. 2013. [23] E. A. Boroujeni and H. R. Momeni, "Non-fragile nonlinear fractional order observer design for a class of nonlinear fractional order systems," Signal Processing, vol. 92, no. 10, pp. 2365-2370, Oct. 2012. [24] Y. H. Lan, W. J. Li, Y. Zhou, and Y. P. Luo, "Non-fragile observer design for fractional-order one-sided Lipschitz nonlinear systems," International J. of Automation and Computing, vol. 10, no. 4, pp. 296-302, Aug. 2013. [25] E. A. Boroujeni and H. R. Momeni, "An iterative method to design optimal non-fragile H∞ observer for Lipschitz nonlinear fractional-order systems," Nonlinear Dynamics, vol. 80, no. 4, pp. 1801-1810, Jun. 2015. [26] L. Liu, Z. Han, and W. Li, "H∞ non-fragile observer-based sliding mode control for uncertain time-delay systems," J. of the Franklin Institute, vol. 347, no. 2, pp. 567-576, Mar. 2010. [27] Y. Liu, Y. Niu, and Y. Zou, "Non-fragile observer-based sliding mode control for a class of uncertain switched systems," J. of the Franklin Institute, vol. 351, no. 2, pp. 952-963, Feb. 2014. [28] L. Gao, D. Wang, and Y. Wu, "Non-fragile observer-based sliding mode control for Markovian jump systems with mixed mode-dependent time delays and input nonlinearity," Applied Mathematics and Computation, vol. 229, pp. 374-395, Feb. 2014. [29] Y. Kao, W. Li, and C. Wang, "Nonfragile observer‐based H∞ sliding mode control for Itô stochastic systems with Markovian switching," International J. of Robust and Nonlinear Control, vol. 24, no. 15, pp. 2035-2047, Oct. 2014. [30] F. Zhong, H. Li, and S. Zhong, "State estimation based on fractional order sliding mode observer method for a class of uncertain fractional-order nonlinear systems," Signal Processing, vol. 127, pp. 168-184, Oct. 2016. [31] I. Podlubny, Fractional Differential Equations, New York, Academic Press, 1999. [32] S. Boyd, L. El Ghaoui, E. Feron, and V. Balakrishnan, Linear Matrix Inequalities in Systems and Control Theory, Philadelphia: SIAM, 1994. [33] S. Liu, W. Jiang, X. Li, and X. F. Zhou, "Lyapunov stability analysis of fractional nonlinear systems," Applied Mathematics Letters, vol. 51, pp. 13-19, Jan. 2016.ArminSolhroshanMohammad Reza Alizadeh PahlavaniArashDehestani Kolagar28202225126110.66224/ijece.29107.19.4.251http://ijece.org/en/Article/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107http://ijece.org/en/Article/Download/29107[1] م. ر. علیزاده پهلوانی و ب شیرالی، "طراحی تحلیلی چگالی شار مغناطیسی بارداری و شار پیوندی در ماشین الکتریکی شار شعاعی مغناطیس دائم روتور دوگانه با هسته هوایی، " الکترومغناطیس کاربردی، سال 3، شماره 2، صص. 34-25، تابستان 1394. [2] Z. Q. Zhu, D. Ishak, D. Howe, and J. Chen, "Unbalanced magnetic forces in permanent magnet brushless machines with diametrically asymmetric phase windings," IEEE Trans. on Industry Application, vol. 43, no. 6, pp. 1544-1553, Nov./Dec. 2007. [3] D. Zarko, D. Ban, and T. A. Lipo, "Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance," IEEE Trans. Magn., vol. 42, no. 7, pp. 1828-1837, Jul. 2006. [4] J. Hur, S. Yoon, D. Hwang, and D. Hyun, "Analysis of PMLSM using three dimensional equivalent magnetic circuit network method," IEEE Trans. Magn., vol. 33, no. 5, pp. 4143-4145, Sept. 1997. [5] A. Rahideh and T. Korakianitis, "Analytical magnetic field calculation of slotted brushless PM machines with surface inset magnets," IEEE Trans. Magn., vol. 48, no. 10, pp. 2633-2649, Oct. 2012. [6] A. Vahaj, A. Rahideh, H. Moayed-Jahromi, and A. Ghaffari, "Exact two-dimensional analytical calculations for magnetic field, electromagnetic torque, UMF, back-EMF, and inductance of outer rotor surface inset permanent magnet machines," Mathematical and Computational Applications, vol. 24, no. 1, 25 pp., 2019. [7] A. Ghaffari, et al., "2-D analytical model for outer-rotor consequent-pole brushless PM machines," IEEE Trans. on Energy Conversion, vol. 34, no. 4, pp. 2226-2234, Dec. 2019. [8] T. Lubin and A. Rezzoug, "3-D analytical model for axial-flux eddy-current couplings and brakes under steady-state conditions," IEEE Trans. Magn., vol. 51, no. 10, Article ID: 8203712, 12 pp., Oct. 2015. [9] T. Lubin and A. Rezzoug, "Improved 3-D analytical model for axial-flux eddy-current couplings with curvature effects," IEEE Trans. on Magnetics, vol. 53, no. 9, Article ID: 8002409, 9 pp., Sept. 2017. [10] L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, "Subdomain model for predicting armature reaction field of surface-mounted permanent-magnet machines accounting for tooth-tips," IEEE Trans. on Magnetics, vol. 47, no. 4, pp. 812-822, Apr. 2011. [11] M. Cheng and S. Zhu, "Calculation of PM eddy current loss in IPM machine under PWM VSI supply with combined 2-D FE and analytical method," IEEE Trans. on Magnetics, vol. 53, no. 1, Article ID: 6300112, 12 pp., Jan. 2017. [12] S. Teymoori, A. Rahideh, H. Moayed-Jahromi, and M. Mardaneh, "2-D Analytical magnetic field prediction for consequent-pole permanent magnet synchronous machines," IEEE Trans. on Magnetics, vol. 52, no. 6, Article ID: 8202114, 14 pp., Jun. 2016. [13] K. Boughrara, R. Ibtiouen, and F. Dubas, "Analytical prediction of electromagnetic performances and unbalanced magnetic forces in fractional slot spoke-type permanent magnet machines," in Proc. Int. Conf. on Electrical Machines, ICEM’16, pp. 1366-1372, Lausanne, Switzerland, 4-7 Sept. 2016. [14] D. Li, R. Qu, J. Li, and W. Xu, "Consequent-pole toroidal-winding outer-rotor vernier permanent-magnet machines," IEEE Trans. on Industry Applications, vol. 51, no. 6, pp. 4470-4481, Nov./ Dec. 2015. [15] D. Zarko, D. Ban, and T. A. Lipo, "Analytical solution for cogging torque in surface permanentmagnet motors using conformal mapping," IEEE Trans. on Magnetics, vol. 44, no. 1, pp. 352-365, Jan. 2008. [16] K. Boughrara, B. L. Chikouche, R. Ibtiouen, D. Zarko, and O. Touhami, "Analytical model of slotted air-gap surface mounted permanent-magnet synchronous motor with magnet bars magnetized in the shifting direction," IEEE Trans. on Magnetics, vol. 45, no. 2, pp. 747-758, Feb. 2009. [17] K. Boughrara, D. Zarko, R. Ibtiouen, O. Touhami, and A. Rezzoug, "Magnetic field analysis of inset and surface-mounted permanent-magnet synchronousmotors using Schwarz-Christoffel transformation," IEEE Trans. on Magnetics, vol. 45, no. 8, pp. 3166-3178, Aug. 2009. [18] A. Rahideh, A. Ghaffari, A. Barzegar, and A. Mahmoudi, "Analytical model of slotless brushless PM linear motors considering different magnetization patterns," IEEE Trans. on Energy Conversion, vol. 33, no. 4, pp. 1797-1804, Dec. 2018. [19] H. Moayed-Jahromi, A. Rahideh, and M. Mardaneh, "2-D analytical model for external rotor brushless PM machines," IEEE Trans. on Energy Conversion, vol. 31, no. 3, pp. 1100-1109, Sept. 2016.mahsakaramiroohollahbarzaminirezasharifi28202223825010.66224/ijece.29141.19.4.238http://ijece.org/en/Article/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141http://ijece.org/en/Article/Download/29141[1] K. Parmesh, R. P. Neriya, and M. V. Kumar, "Wireless charging system for electric vehicles," International J. of Vehicle Structures and Systems, vol. 9, no. 1, pp. 23-26, Feb. 2017. [2] I. Rahman, P. M. Vasant, B. S. M. Singh, M. Abdullah-Al-Wadud, and N. Adnan, "Review of recent trends in optimization techniques for plug-in hybrid, and electric vehicle charging infrastructures," Renewable and Sustainable Energy Reviews, vol. 58, pp. 1039-1047, May 2016. [3] N. B. Xuan, D. M. Vilathgamuwa, G. H. B. Foo, W. Peng, A. Ong, U. K. Madawala, and D. N. Trong, "An efficiency optimization scheme for bidirectional inductive power transfer systems," IEEE Trans. Power Electron, vol. 30, no. 11, pp. 6310-6319, Dec. 2014. [4] I. Hwang, Y. J. Jang, Y. D. Ko, and M. S. Lee, "System optimization for dynamic wireless charging electric vehicles operating in a multiple-route environment," IEEE Trans. on Intelligent Transportation Systems, vol. 19, no. 6, pp. 1709-1726, Jun. 2018. [5] N. B. Xuan, G. Foo, A. Ong, D. M. Vilathgamuwa, and U. K. Madawala, "Efficiency optimization for bidirectional IPT system," in Proc. of the IEEE Transportation Electrification Conf. and Expo, ITEC’14, 5 pp., Dearborn, MI, USA, 15-18 Jun. 2014. [6] M. Bojarski, E. Asa, K. Colak, and D. Czarkowski, "Analysis and control of multiphase inductively coupled resonant converter for wireless electric vehicle charger applications," IEEE Trans. on Transportation Electrification, vol. 3, no. 2, pp. 312-320, Jun. 2017. [7] X. Z. Wei, Z. S. Wang, and H. F. Dai, "A critical review of wireless power transfer via strongly coupled magnetic resonances," Energies, vol. 7, no. 7, pp. 4316-4341, Jul. 2014. [8] Z. Wang, X. Wei, and H. Dai, "Design and control of a 3 kW wireless power transfer system for electric vehicles," Energies, vol. 9, no. 1, Article ID: 10, 18 pp., Dec. 2015. [9] Y. Geng, B. Li, Z. Yang, F. Lin, and H. Sun, "A high efficiency charging strategy for a super capacitor using a wireless power transfer system based on inductor/capacitor/capacitor (LCC) compensation topology," Energies, vol. 10, no. 1, Article ID: 135, 17 pp., Jan. 2017. [10] T. Kan, T. D. Nguyen, J. C. White, R. K. Malhan, and C. C. Mi, "A new integration method for an electric vehicle wireless charging system using LCC compensation topology: analysis and design," IEEE Trans. on Power Electronics, vol. 32, no. 2, pp. 1638-1650, Feb. 2017. [11] S. Li and C. C. Mi, "Wireless power transfer for electric vehicle applications," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 3, no. 1, pp. 4-17, Mar. 2015. [12] F. Musavi and W. Eberle, "Overview of wireless power transfer technologies for electric vehicle battery charging," IET Power Electron, vol. 7, no. 1, pp. 60-66, Jan. 2014. [13] G. Sultana, T. R. Deepak, P. Bhushan, M. Azeem, and G. N. Swathi, "Design and implementation of wireless power transfer charging system on miniature model," SSRG International J. of Electrical and Electronics Engineering (SSRG-IJEEE), vol. 3, no. 4, pp. 27-31, Mar. 2016. [14] D. H. Tran, V. B. Vu, and W. Choi, "Design of a high efficiency wireless power transfer system with intermediate coils for the on-board chargers of electric vehicles," IEEE Trans. on Power Electronics, vol. 33, no. 1, pp. 175-187, Jan. 2018. [15] L. Sun, H. Tang, and Y. Zhang, "Determining the frequency for load-independent output current in three-coil wireless power transfer system," Energies, vol. 8, pp. 9719-9730, Sept. 2015. [16] X. D. T. Garcia, J. Vazquez, and P. Roncero-Sanchez, "Design, implementation issues and performance of an inductive power transfer system for electric vehicle chargers with series-series compensation," IET Power Electron, vol. 8, no. 10, pp. 1920-1930, Jul. 2015. [17] A. Swain, S. Devarakonda, and U. Madawala, "Modelling, sensitivity analysis and controller synthesis of multi pick-up bi-directional inductive power transfer systems," IEEE Trans. on Industrial Informatics, vol. 10, no. 2, pp. 1372-1380, May 2014. [18] A. El-Zonkoly and L. dos Santos Coelho, "Optimal allocation, sizing of PHEV parking lots in distribution system," International J. of Electrical Power & Energy Systems, vol. 67, pp. 472-477, May 2015. [19] S. A. Birrell, D. Wilson, C. P. Yang, G. Dhadyalla, and P. Jennings, "How driver behaviour and parking alignment affects inductive charging systems for electric vehicles," Transportation Research Part C: Emerging Technologies, vol. 58, pp. 721-731, May 2015. [20] M. Honarmand, A. Zakariazadeh, and S. Jadid, "Integrated scheduling of renewable generation and electric vehicles parking lot in a smart microgrid," Energy Conversion and Management, vol. 86, pp. 745-755, Oct. 2014. [21] A. Zakariazadeh, S. Jadid, and P. Siano, "Integrated operation of electric vehicles and renewable generation in a smart distribution system," Energy Conversion and Management, vol. 89, pp. 99-110, Jan. 2015. [22] W. Zhang, X. Fan, Y. Zheng, and X. Zhang, "Application of sliding mode control with leakage loop modulation in dynamic wireless charging system of electric vehicle," in Proc. 12th Int. Symp. on Computational Intelligence and Design, ISCID’19, pp. 262-265, Hangzhou, China, 14-15 Dec. 2019. [23] L. Gong, C. Xiao, B. Cao, and Y. Zhou, "Adaptive smart control method for electric vehicle wireless charging system," Energies, vol. 11, no. 10, Article ID: 2685, 13 pp., Oct. 2018. [24] م. ویسی، م. شاصادقی و م. ر. سلطانپور "طراحی کنترل‌کننده پایدار مقاوم بهینه فازی جهت پایدارسازی سرعت خودروی برقی، در حضور عدم قطعیت‌های پارامتری و اغتشاشات خارجی،" نشریه مهندسی برق و مهندسی كامپیوتر ایران، الف- مهندسی برق، سال 17، شماره 2-الف، صص. 96-81، تابستان 1398. [25] F. Diba, A. Arora, and E. Esmailzadeh, "Optimized robust cruise control system for an electric vehicle," Systems Science & Control Engineering: an Open Access J., vol. 2, no. 1, pp. 175-182, Dec. 2014. [26] K. Nam, S. Oh, H. Fujimoto, and Y. Hori, "Design of adaptive sliding mode controller for robust yaw stabilization of in-wheel-motor-driven electric vehicles," World Electric Vehicle J., vol. 5, no. 2, pp. 588-597, Jun. 2012. [27] S. Deb, X. Gao, K. Tammi, K. Kalita, and P. Mahanta, "A novel chicken swarm and teaching learning-based algorithm for electric vehicle charging station placement problem," Energy, vol. 220, Article ID: 119645, Apr. 2021. [28] S. Deb, et al., "A robust two-stage planning model for the charging station placement problem considering road traffic uncertainty," IEEE Trans. on Intelligent Transportation Systems, early access, 15 pp., Feb. 2021. [29] V. Ponnam and K. Swarnasri, "Multi-objective optimal allocation of electric vehicle charging stations in radial distribution system using teaching learning based optimization," International J. of Renewable Energy Research, vol. 10, no. 1, pp. 366-377, Mar. 2020. [30] P. Ning, O. Onar, and J. Miller, "Genetic algorithm-based coil system optimization for wireless power charging of electric vehicles," in Proc. IEEE Transportation Electrification Conf. and Expo, ITEC’13, 5 pp., Detroit, MI, USA, 16-19 Jun. 2013. [31] A. Niccolai, L. Bettini, and R. Zich, "Optimization of electric vehicles charging station deployment by means of evolutionary algorithms," International J. of Intelligent Systems, vol. 36, no. 9, pp. 5359-5383, Sept. 2021.حسین ملک پور شهرکیAliAbolmasoumi28202227127810.66224/ijece.29145.19.4.271http://ijece.org/en/Article/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145http://ijece.org/en/Article/Download/29145[1] S. Jam and H. Malekpoor, "Analysis on wideband patch arrays using unequal arms with equivalent circuit model in X-band," IEEE Antennas Wireless. Propag. Lett., vol. 15, pp. 1861-1864, 2016. [2] A. A. Roseline, K. Malathi, and A. K. Shrivastav, "Enhanced performance of a patch antenna using spiral-shaped electromagnetic bandgap structures for high-speed wireless networks," IET Microw. Antennas Propag., vol. 5, no. 14, pp. 1750-1755, Nov. 2011. [3] H. Malekpoor and S. Jam, "Enhanced bandwidth of shorted patch antennas using folded-patch techniques," IEEE Antennas Wirel. Propag. Lett., vol. 12, pp. 198-201, Feb. 2013. [4] H. Malekpoor and M. Hamidkhani, "Compact multi-band stacked circular patch antenna for wideband applications with enhanced gain," Electromagnetics, vol. 39, no. 4, pp. 241-253, Mar. 2019. [5] K. M. Mak, H. W. Lai, and K. M. Luk, "A 5G wideband patch antenna with antisymmetric L-shaped probe feeds," IEEE Trans. Antennas Propag., vol. 66, no. 2, pp. 957-961, Nov. 2018. [6] H. Malekpoor and S. Jam, "Analysis on bandwidth enhancement of compact probe-fed patch antenna with equivalent transmission line model," IET Microw. Antennas Propag., vol. 9, no. 11, pp. 1136-1143, Aug. 2015. [7] S. Wang, et al., "Wideband shorted patch antenna with a modified half U-slot," IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 689-692, Jun. 2012. [8] K. Klionovski and A. Shamim, "Physically connected stacked patch antenna design with 100% bandwidth," IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 3208-3211, Nov. 2017. [9] H. Malekpoor and M. Hamidkhani, "Performance enhancement of low-profile wideband multi-element MIMO arrays backed by AMC surface for vehicular wireless communications," IEEE Access, vol. 9, pp. 166206-166222, Dec. 2021. [10] H. Malekpoor and S. Jam, "Design, analysis, and modeling of miniaturized multi-band patch arrays using mushroom-type electromagnetic band gap structures," International J. of RF and Microwave Computer-Aided Engineering, vol. 28, no. 6, pp. 1-13, Apr. 2018. [11] L. Yang, M. Fan, F. Chen, J. She, and Z. Feng, "A novel compact electromagnetic-bandgap (EBG) structure and its applications for microwave circuits," IEEE Trans. Microw. Theory Tech., vol. 53, no. 1, pp. 183-190, Jan. 2005. [12] R. C. Hadarig, M. E. de Cos, Y. Alvarez, and F. L. Heras, "Novel bow-tie antenna on artificial magnetic conductor for 5.8 GHz radio frequency identification tags usable with metallic objects," IET Microw. Antennas Propag., vol. 5, no. 9, pp. 1097-1102, Dec. 2011. [13] A. Foroozesh and L. Shafai, "Effects of artificial magnetic conductors in the design of low-profile high-gain planar antennas with high-permittivity dielectric superstrate," IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 10-13, Feb. 2009. [14] P. Prakash, M. P. Abegaonkar, A. Basuand, and S. K. Koul, "Gain enhancement of a CPW-fed monopole antenna using polarization-insensitive AMC structure," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 1315-1318, Oct. 2013. [15] H. Malekpoor and S. Jam, "Improved radiation performance of low profile printed slot antenna using wideband planar AMC surface," IEEE Trans. Antennas Propag., vol. 64, no. 11, pp. 4626-4638, Nov. 2016. [16] D. Nashaat, H. A. Elsadek, E. A. Abdallah, M. F. Iskander, and H. M. E. Hennawy, "Ultrawide bandwidth 2×2 microstrip patch array antenna using electromagnetic band-gap structure (EBG)," IEEE Trans. Antennas Propag., vol. 59, no. 5, pp. 1528-1534, Nov. 2011. [17] S. Jam and H. Malekpoor, "Compact 1×4 patch antenna array by means of EBG structures with enhanced bandwidth," Microw. Opt. Technol. Lett, vol. 58, no. 12, pp. 2983-2989, May 2016. [18] S. Yan, P. J. Soh, and G. A. E. Vandenbosch, "Low-profile dual-band textile antenna with artificial magnetic conductor plane," IEEE Trans. Antennas Propag., vol. 62, no. 12, pp. 6487-6490, Dec. 2014. [19] E. Ameri, S. H. Esmaeli, and S. H. Sedighy, "Wide band radar cross section reduction by thin AMC structure," AEU-Int. J. Electron. Commun., vol. 93, pp. 150-153, Sept. 2018. [20] A. T. Almutawa and G. Mumcu, "Small artificial magnetic conductor backed log-periodic microstrip patch antenna," IET Microw. Antennas Propag., vol. 7, no. 14, pp. 1137-1144, Apr. 2013. [21] B. S. Cook and A. Shamim, "Utilizing wideband AMC structures for high-gain inkjet-printed antennas on lossy paper substrate," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 76-79, Jan. 2013. [22] N. A. Abbasi and R. J. Langley, "Multiband-integrated antenna/artificial magnetic conductor," IET Microw. Antennas Propag., vol. 5, no. 6, pp. 711-717, Apr. 2011. [23] Y. Zheng, J. Gao, X. Cao, Z. Yuan, and H. Yang, "Wideband RCS reduction of a microstrip antenna using artificial magnetic conductor structures," IEEE Antennas Wireless Propag. Lett., vol. 14, pp. 1582-1585, Oct. 2015. [24] M. E. de Cos, Y. Alvarez, and F. L. Heras, "Planar artificial magnetic conductor: design and characterization setup in the RFID SHF band," Journal of Electromagnetic Waves and Applications, vol. 23, pp. 1467-1478, Mar. 2009. [25] H. Malekpoor, "Comparative investigation of reflection and band gap properties of finite periodic wideband artificial magnetic conductor surfaces for microwave circuits applications in X-band," International J. of RF and Microwave Computer-Aided Engineering, vol. 29, no. 10, Article ID: e21874, Oct. 2019. [26] A. Foroozesh and L. Shafai, "Investigation into the application of artificial magnetic conductors to bandwidth broadening, gain enhancement and beam shaping of low profile and conventional monopole antennas," IEEE Trans. Antennas Propag., vol. 59, no. 1, pp. 4-20, Jan. 2011. [27] W. Yang, H. Wang, W. Che, and J. Wang, "A wideband and high-gain edge-fed patch antenna and array using artificial magnetic conductor structures," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 769-772, Jun. 2013. [28] B. S. Cook and A. Shamim, "Flexible and compact AMC based antenna for telemedicine applications," IEEE Trans. Antennas Propag., vol. 61, no. 2, pp. 524-531, Oct. 2013. [29] D. Feng, et al., "A broadband low-profile circular-polarized antenna on an AMC reflector," IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 2840-2843, Sept. 2017. [30] S. Yan, P. J. Soh, M. Mercuri, D. Schreurs, and G. A. E. Vandenbosch, "Low profile dual-band antenna loaded with artificial magnetic conductor for indoor radar systems," IET Microw. Antennas Propag., vol. 9, no. 2, pp. 184-190, Mar. 2015. [31] J. Liu, J. Y. Li, J. J. Yang, Y. X. Qi, and R. Xu, "AMC-loaded low-profile circularly polarized reconfigurable antenna array," IEEE Antennas Wireless Propag. Lett., vol. 19, no. 7, pp. 1276-1280, Jul. 2020. [32] S. Rajagopal, G. Chennakesavan, D. R. P. Subburaj, R. Srinivasan, and A. Varadhan, "A dual polarized antenna on a novel broadband multilayer Artificial Magnetic Conductor backed surface for LTE/CDMA/GSM base station applications," AEU-Int. J. Electron. Commun., vol. 80, pp. 73-79, Oct. 2017. [33] S. Ghosh, T. N. Tran, and T. L. Ngoc, "Dual-layer EBG based miniaturized multi-element antenna for MIMO systems," IEEE Trans. Antennas Propag., vol. 62, no. 8, pp. 3985-3997, Aug. 2014. [34] G. Li, H. Zhai, L. Li, C. Liang, R. Yu, and S. Liu, "AMC-loaded wideband base station antenna for indoor access point in MIMO system," IEEE Trans. Antennas Propag., vol. 63, no. 2, pp. 525-533, Feb. 2015. [35] J. Y. Deng, J. Y. Li, L. Zhao, and L. X. Guo, "A dual-band inverted-F MIMO antenna with enhanced isolation for WLAN applications," IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 2270-2273, Jun. 2017. [36] H. Malekpoor, A. Abolmasoumi, and M. Hamidkhani, "High gain, high isolation, and low-profile two-element MIMO array loaded by the Giuseppe Peano AMC reflector for wireless communication systems," IET Microw. Antennas Propag., vol. 16, no. 1, pp. 46-61, Jan. 2022. [37] Z. Xu and C. Deng, "High-isolated MIMO antenna design based on pattern diversity for 5G mobile terminals," IEEE Antennas Wireless Propag. Lett., vol. 19, no. 3, pp. 467-471, Mar. 2020. [38] J. Zhu, S. Li, S. Liao, and Q. Xue, "Wideband low-profile highly isolated MIMO antenna with artificial magnetic conductor," IEEE Antennas Wireless Propag. Lett., vol. 17, no. 3, pp. 458-462, Mar. 2018.MohammadR.AliAli Khamesi Naeini28202229430010.66224/ijece.29167.19.4.294http://ijece.org/en/Article/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167http://ijece.org/en/Article/Download/29167[1] M. Akbari, "Single-stage fully recycling folded cascode OTA for switched-capacitor circuits," Electronics Letters, vol. 51, no. 13, pp. 977-979, May. 2015. [2] O. Hashemipour and M. Akbari, "Enhancing transconductance of ultra-low-power two-stage folded cascode OTA," Electronics Letters, vol. 50, no. 21, pp. 1514-1516, Oct. 2014. [3] P. Y. Kuo, G. J. Fan, and S. D. Tsai, "The enhancement of recycling folded cascode amplifier," in Proc. IEEE Int. Conf. on Consumer Electronics-Taiwan, ICCE-TW'16, 2 pp., Nantou, Taiwan, 27-29 May 2016. [4] م. رشتیان، ا. هاشمی‌پور و ک. ناوی، "طراحی یک فیلتر پایین‌گذر چبیشف درجه چهارم سوییچ خازنی با ساختار انتگرال‌گیر خودصفرشونده در ولتاژ تغذیه 2/1 ولت،" نشریه مهندسی برق و مهندسی کامپیوتر ایران، سال 5، شماره 3، صص. 182-178، پاییز 1386. [5] A. Mesri, M. Pirbazari, K. Hadidi, and A. Khoei, "High gain two-stage amplifier with positive capacitive feedback compensation," IET Circuits, vol. 9, no. 3, pp. 181-190, May 2015. [6] R. S. Assaad and J. Silva-Martinez, "The recycling folded cascode: a general enhancement of the folded cascode amplifier," IEEE J. of Solid-State Circuits, vol. 44, no. 9, pp. 2535-2542, Sep. 2009. [7] X. Zhao, H. Fang, T. Ling, and J. Xu, "Transconductance improvement method for low-voltage bulk-driven input stage," AEU-International J. of Electronics and Communications, vol. 49, no. C, pp. 98-103, Mar. 2015. [8] G. Yosefi, "The high recycling folded cascode (HRFC): a general enhancement of the recycling folded cascode operational amplifier," AEU-International J. of Electronics and Communications, vol. 89, pp. 70-90, Jul. 2019. [9] A. J. Lopez-Martin, et al., "Enhanced single-stage folded cascode OTA suitable for large capacitive loads," IEEE Trans. on Circuits and Systems, vol. 65, no. 4, pp. 441-445, Apr. 2018. [10] R. Navidi, A. Fathi, K. Mohammadi, M. Mousazadeh, and A. Mousazadeh, "Improved gain folded cascode op-amp employing a novel positive feedback structure," in Proc. 27th Iranian Conf. on Electrical Engineering, ICEE'19, pp. 269-273, Yazd, Iran, 30 Apr.-2 May 2019. [11] M. Rashtian and M. Vafapour, "Gain boosted folded cascode op-amp with capacitor coupled auxiliary amplifiers," International J. of Engineering, Trans. B: Applications, vol. 34, no. 5, pp. 1233-1238, May 2021. [12] C. Garcia-Alberdi, A. J. Lopez-Martinez, L. Acosta, R. G. Carvajal, and J. Ramirez-Angulo, "Tunable class AB CMOS Gm-C filter based on quasi-floating gate techniques," IEEE Trans. on Circuits and Systems, vol. 60, no. 5, pp. 1300-1309, May 2013. [13] M. Rashtian, O. Hashemipour, and A. M. A. Hemmatyar, "A simple time domain approach to noise analysis of switched capacitor circuits," IEICE Electronics Express (ELEX), vol. 7, no. 11, pp. 745-750, May 2010. [14] M. Rashtian, A. M. A. Hemmatyar, and O. Hashemipour, "A new simple method for analysing of thermal noise in switched capacitor filters," International J. of Electronics, vol. 99, no. 12, pp. 1739-1752, 2012. [15] S. Liu, Z. Zhu, J. Wang, L. Liu, and Y. Yang, "A 1.2-V 2.41-GHz three-stage CMOS OTA with efficient frequency compensation technique," IEEE Trans. on Circuits and Systems I, vol. 66, no. 1, pp. 20-30, Jan. 2019. [16] P. Y. Kuo and S. T. Tsai, "An enhanced scheme of multi-stage amplifier with high-speed high-gain blocks and recycling frequency cascode circuitry to improve gain-bandwidth and slew rate," IEEE, vol. 7, pp. 130820-130829, 2019. [17] B. Razavi, Design of Analog CMOS Integrated Circuits, 2nd Ed. New York, NY, USA: McGraw-Hill, 2017.hannaneGholamntajhabibAdarangseyed salehMohseniseyed salehGhoreishi28202227928610.66224/ijece.29187.19.4.279http://ijece.org/en/Article/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187http://ijece.org/en/Article/Download/29187[1] F. Wang and R. Harjani, "An improved model for the slewing behavior of opamps," IEEE Trans. on Circuits and Systems II, vol. 42, no. 10, pp. 679-681, Oct. 1995. [2] M. Yavari, N. Maghari, and O. Shoaei, "An accurate analysis of slew rate for two-stage CMOS opamps," IEEE Trans. on Circuits and Systems II, vol. 52, no. 3, pp. 164-167, Mar. 2005. [3] H. Rezaee-Dehsorkh, N. Ravanshad, R. Lotfi, and K. Mafinezhad, "Modified model for settling behavior of operational amplifiers in nanoscale CMOS," IEEE Trans. on Circuits and Systems II, vol. 56, no. 5, pp. 384-388, May 2009. [4] D. G. Nairn, "Cascode loads and amplifier settling behavior," IEEE Trans. on Circuits and Systems I, vol. 59, no. 1, pp. 44-51, May/Jan. 2012. [5] Z. Yan, P. Mak, M. Law, R. Martins, and F. Maloberti, "Nested-current-mirror rail-to-rail-output single-stage amplifier with enhancements of DC gain, GBW and slew rate," IEEE J. of Solid State Circuits, vol. 50, no. 10, pp. 2353-2366, Oct. 2015. [6] S. Seth and B. Murmann, "Settling time and noise optimization of a three-stage operational transconductance amplifier," IEEE Trans. on Circuits and Systems I, vol. 60, no. 5, pp. 1168-1174, May 2013. [7] G. Giustolisi and G. Palumbo, "Three-stage dynamic-biased CMOS amplifier with a robust optimization of the settling time," IEEE Trans. on Circuits and Systems I, vol. 62, no. 11, pp. 2641-2651, Nov. 2015. [8] G. Giustolisi and G. Palumbo, "Design of three-stage OTA based on settling-time requirements including large and small signal behavior," IEEE Trans. on Circuits and Systems I, vol. 68, no. 3, pp. 998-1011, Mar. 2021. [9] M. Liu, D. Li, and Z. Zhu, "A dual-supply two-stage CMOS op-amp for high-speed pipeline ADCs application," IEEE Trans. on Circuits and Systems II, vol. 67, no. 4, pp. 650-654, Apr. 2020. [10] A. Paul, J. Ramirez-Angulo, A. J. Lopez-Martin, R. G. Carvajal, and J. M. Rocha-Perez, "Pseudo-three-stage miller op-amp with enhanced small-signal and large-signal performance," IEEE Trans. on Very Large Scale Integration (VLSI) Systems, vol. 27, no. 10, pp. 2246-2259, Oct. 2019. [11] C. Chanapromma and J. Mahattanakul, "Improved design procedure for two-stage CMOS op-amp employing current buffer," in Proc. IEEE 17th Int. Conf. on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 384-387, Phuket, Thailand, 24-27 Jun. 2020. [12] A. Gupta and S. Singh, "Design of two stage CMOS op-amp with high slew rate and high gain in 180 nm," in Proc. IEEE 2nd Int. Conf. on I-SMAC, pp. 341-345, Palladam, India, 30-31 Aug.. 2018. [13] C. Chanapromma and J. Mahattanakul, "Redesign procedure for two-stage CMOS op-amp with least error of frequency response and phase margin," in Proc. IEEE 17th Int. Conf. on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 717-720, Phuket, Thailand, 24-27 Jun. 2020. [14] R. Lotfi, M. Taherzadeh-Sani, M. Yaser Azizi, and O. Shoaei, "Low-power design techniques for low-voltage fast-settling operational amplifiers in switched-capacitor applications," Integration, vol. 36, no. 4, pp. 175-189, Nov. 2003. [15] T. C. Carusone, D. A. Johns, and K. W. Martin, Analog Integrated Circuit Design, 2nd Edition, John Wiley & Sons Inc., 2012.ElahehMashhourSeyed HamidrezaAlemohammad28202222523710.66224/ijece.29252.19.4.225http://ijece.org/en/Article/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252http://ijece.org/en/Article/Download/29252[1] ط. ق. شاهرخشاهي، اضافه ولتاژها در شبکه‌های توزیع انرژی، چاپ اول، انتشارات آزاده به سفارش شرکت فرانیرو، ایران، 1385. [2] ط. ق. شاهرخشاهي، برق‌گیرها در شبکه‌های توزیع و انتقال انرژی، چاپ اول، نشر علوم دانشگاهی، ایران، 1382. [3] ط. ق. شاهرخشاهي، برق‌گیرهای فشارقوی بدون فاصله هوایی، چاپ اول، انتشارات دفینه، ایران، 1378. [4] J. J. Burke, V. Varneckas, E. Chebli, and G. Hoskey, "Application of MOV and gapped arresters on non-effectively grounded distribution systems," IEEE Trans. on Power Delivery, vol. 6, no. 2, pp. 794-800, Apr. 1991. [5] L. J. Bohmann, J. McDaniel, and E. K. Stanek, "Lightning arrester failure and ferroresonance on a distribution system," IEEE Trans. on Industry Applications, vol. 29, no. 6, pp. 1189-1195, Nov. 1993. [6] K. Nakada, et al., "Distribution arrester failures caused by lightning current flowing from customer's structure into distribution lines," IEEE Trans. on Power Delivery, vol. 14, no. 4, pp. 1527-1532, Oct. 1999. [7] J. Snodgrass and L. Xie, "Overvoltage analysis and protection of lightning arresters in distribution systems with distributed generation," International J. of Electrical Power & Energy Systems, vol. 123, Article ID: 106209, Dec. 2020. [8] A. L. Orille-Fernandez, S. B. Rodriguez, and M. A. G. Gotes, "Optimization of surge arrester's location," IEEE Trans. on Power Delivery, vol. 19, no. 1, pp. 145-150, Jan. 2004. [9] R. Shariatinasab, B. Vahidi, and S. H. Hosseinian, "Statistical evaluation of lightning-related failures for the optimal location of surge arresters on the power networks," IET Generation, Transmission & Distribution, vol. 3, no. 2, pp. 129-144, Feb. 2009. [10] G. V. S. Rocha, et al., "Optimized surge arrester allocation based on genetic algorithm and ATP simulation in electric distribution systems," Energies, vol. 12, Article ID: 4110, 15 pp., Oct. 2019. [11] M. A. Araujo, R. A. Flauzino, R. A. C. Altafim, O. E.Batista. and L. A. Morae., "Practical methodology for modeling and simulation of a lightning protection system using metal-oxide surge arresters for distribution lines," Electric Power Systems Research, vol. 118, pp. 47-54, Jul. 2015. [12] P. Sestasombut and A. Ngaopitakkul, "Evaluation of a direct lightning strike to the 24 kV distribution lines in Thailand," Energies, vol. 12, no. 16, Article ID: 3193, 31, Aug. 2019. [13] K. Nakada, S. Yokoyama, T. Yokota, A. Asakawa, and T. Kawabata, "Analytical study on prevention methods for distribution arrester outages caused by winter lightning," IEEE Trans. on Power Delivery, vol. 13, no. 4, pp. 1399-1404, Oct. 1998. [14] C. A. Christodoulou, L. Ekonomou, N. Papanikolaou, and I. F. Gonos, "Effect of the grounding resistance to the behavior of high-voltage transmission lines' surge arresters," IET Science, Measurement and Technology, vol. 8, no. 6, pp. 470-478, Mar. 2014. [15] "Overvoltage protection; Metal oxide surge arresters in medium voltage systems-5th edition," ABB Application Guidelines, May 2011. [16] http://etap.com/electrical-power-system-softwa re/etap-products.htm [17] M. V. Lat and J. Kortschinski, "Application guide for surge arresters and field research of lightning effects on distribution systems," in Proc. 10th Int. Conf. on Electricity Distribution, pp. 150-154, Brighton, UK, 8-12 May 1989. [18] https://www.emtp.com/ [19] م. عابدی، ب. وحیدی و ف. رهبر، "تهیه منحنی‌های ایزوکرونیک ایران و کاربرد آن در عملکرد خطوط انتقال نیرو،" سومین کنفرانسی بین‌المللی برق، تهران، ایران، 14 صص.، 21-20 آبان 1367. [20] International Electrotechnical Commission, IEC 60721: Classification of Environmental Conditions, 2013. [21] International Electrotechnical Commission, IEC 60099-4: 2014. Surge Arresters-Part 4: Metal-Oxide Surge Arresters without Gaps for A.C. Systems, 2014. [22] V. Hinrichsen, Metal-Oxid Surge Arrester Fundamentals, 3rd Edition, Siemens AG, Germany, 2011. [23] International Electrotechnical Commission, IEC 60071: Insulation Co-ordination, 2019. [24] IEEE Working Group 3.4.11, Application of Surge Protective Devices Subcommitee, Surge Protective Committee, "Modeling of metal oxide surge arresters," IEEE Trans. on Power Delivery, vol. 7, no. 1, pp. 302-309, Jan. 1992. [25] International Electrotechnical Commission, IEC 61024: Protection against Lightning Electromagnetic, 1993.