Unity Power Factor MPPT for PMSG Wind Turbines Equipped with Matrix Converter
Subject Areas : electrical and computer engineering
A.
Nateghi
1
H.
Kazemi Karegar
2
Keywords: Hill climbing method matrix converter MPPT PMSG wind turbine speed control,
Abstract :
In this paper, a new control method is proposed for extracting the maximum power of wind turbines equipped with Permanent Magnet Synchronous Generator (PMSG), which is connected to the grid via a matrix converter. The method calculates the optimal rotation speed of wind turbine and finds the optimal operation point by hill climbing method. The proposed method is simple and it does not need to use some complex methods such as field oriented and rotor position estimation. Wind turbine speed, electrical torque and consequently maximum output power of wind turbine are obtained by the perfect control of output phases and amplitudes of matrix converter. Moreover, the maximum power is injected to the grid under unity power factor. The proposed method is simulated in MATLAB programming software and the obtained results approve the validity of the method.
[1] R. D. Shukla and R. K. Tripathi, "Maximum power extraction schemes & power control in wind energy conversion system," Int. J. of Scientific & Engineering Research, vol. 3, no. 6, pp. 1-7, Jun. 2012.
[2] I. K. Buehring and L. L. Freris, "Control policies for wind - energy conversion systems," in Generation, Transmission, and Distribution, IEE Proc. C, vol. 128, no. 5, pp. 253-261, Sep. 1981.
[3] S. M. Reza Kazmi, H. Goto, G. Hai - Jiao, and O. Ichinokura, "Review and critical analysis of the research papers published till date on maximum power point tracking in wind energy conversion system," in Proc. IEEE Energy Conversion Congress and Exposition, ECCE'10, , vol. ???, pp. 4075-4082, Sep. 2010.
[4] Q. Wang and L. Chang, "An intelligent maximum power extraction algorithm for inverter - based variable speed wind turbine systems," IEEE Trans. on Power Electronics, vol. 19, no. 5, pp. 1242-1249, Sep. 2004.
[5] G. Yang and Y. Zhu, "Application of a matrix converter for PMSG wind turbine generation system," in Proc. 2nd IEEE Int. Symp. on Power Electronics for Distributed Generation Systems, PEDG'10 , vol. ???, pp. 185-189, ???. 2010.
[6] S. M. Barakati, M. Kazerani, and J. D. Aplevich, "Maximum power tracking control for a wind turbine system including a matrix converter," in Proc. IEEE Trans. on Energy Conversion, vol. 24, pp. 705-713, Sep. 2009.
[7] E. Koutroulis and K. Kalaitzakis, "Design of a maximum power tracking system for wind-energy conversion applications," IEEE Trans. on Industrial Electronics,, vol. 53, no. 2, pp. 486-494, Apr. 2006.
[8] J. Rzasa, "Capacitor clamped multilevel matrix converter controlled with venturini method," in Proc. 13th Power Electron. Motion Control Conf., vol. ???, pp. 357-364, ???. 2008.
[9] M. Chinchilla, S. Arnaltes, and J. C. Burgos, "Control of permanent - magnet generators applied to variable speed wind-energy systems connected to the grid," Energy Conversion, IEEE Trans. on, vol. 21, no. 1, pp. 130-135, Mar. 2006.
[10] C. Busca, A. I. Stan, T. Stanciu, and D. I. Stroe, "Control of permanent magnet synchronous generator for large wind turbines," in Proc. Int.l Symp. on Industrail Electronics, vol. ???, pp. 3871-3876, Jul. 2010.
[11] H. Kazemi Kargar, A. Nateghi, and A. Khodamoradi, "A new approach for wind speed behavior prediction," Int. J. of Advanced Renewable Energy Research, vol. 1, no. 2, pp. 99-102, ???. 2012.
[12] M. Aner and E. Nowicki, "Two-level backward operation of a VSMC for PMSG grid - connected variable speed wind turbine systems," in Proc. IEEE Int. Electric Machines and Drives Conf., vol. ???, pp. 1100-1106, ???. 2011.
[13] N. Mendis, K. M. Muttaqi, and S. Sayeef, "Stand alone operation of wind turbine - based variable speed generators with maximum power extraction capability," IEEE Trans. on Energy Conversion, vol. 27, no. 4, pp. ???-???, Dec. 2012.
[14] J. A. Baroudi, V. Dinavahi, and A. M. Knight, "A review of power converter topologies for wind generators," in Proc. IEEE Int. Conf. in Electric Machines and Drives, vol. ???, pp. 458-465, May 2005.
[15] P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham, and A. Weinstein, "Matrix converters: a technology review," IEEE Trans. on Industrial Electronics, vol. 49, no. 2, pp. 276-288, Apr. 2002.
[16] L. Empringham, P. W. Wheeler, and J. C. Clare, "Intelligent commutaion of matrix converter bi - directional switch cells using novel gate drive techniques," in Proc. IEEE Power Electronics Specialists Conf., vol. 1, pp. 707-713, ???. 1998.
[17] C. Klumpner and F. Blaabjerg, "Experimetnal evauluation of ride - through capabilities for a matrix converter under short power interruptions," IEEE Trans. on Industrial Electronics, vol. 49, no. 2, pp. 315-324, ???. 2002.
[18] A. Nateghi, H. Kazemi Kargar, and S. Bagheri, "Design and implementation of matrix converter to reduce the effects of wind speed fluctuations in PMSG wind turbine," in Proc. 2nd Int. Conf. on the Developments in Renewable Energy Technology, ICDRET'12, vol. ???, pp. 299-302, Jan. 2012.